Topics

HI guys!

I've looked for in the forum and haven't find anything besides the 3PDT guide to understand how it works these switches.

I want to make a 2-button switch for my amp (Supro Delta King 12, with boost and Drive) and I just need to connect 2 3PDT switches to a stereo jack ( thinking about adding a led for each switch) but I can't figure it out how the wiring should be. All the information I find is related to a pcb and 2 (jacks in and out) so I cannot just copy and wiring as the pictures.

Can somebody give a hand here please?
I have attached a picture of what I have.

Thanks in advance.

Hi guys!

I'm building the imp2, but I can't find the correct value resistors. In specific these two:
392k         1         Metal / Carbon Film         1/8W
422k         1         Metal / Carbon Film         1/8W

In Tayda jumps from 390k to 430k and that also happens in Mouser. I believe if I use a 2k with the 390k, and a 390k, 10k, 22k I can get them, but there's not much room in the enclosure, so I was wondering if I could use a bigger one in order to be able to fit everything in it.

Thanks for you help!

Hi guys!

I'm building my first 2 projects, the Expandora and the Turnabout and both projects need a 1n cap that looks like the picture attached. I can't find this cap anywhere. Do you know any alternative for it?

Thanks a lot!