Hi, just recently finished up my 4th or 5th madbean project and have a bit of a weird problem. I doubt anyone will be able to answer, I guess I'm just trying to get a handle on how to track down the issue. I'm usually pretty good at fixing things that are completely non working, but not "sort of working"
Built the Degenerator, everything seemed good upon first test, but then I realized there's something up with my Delay time pot. Full CCW, it works as intended. As I turn CW, it continues to work as intended, until I get to about 1/4 or 1/3 of a turn, at that point I hear static similar to quickly pulling out a cable quickly, then no delay. Pot is as specified (50kB) and reading it while turning it, it doesn't seem to have any issues and is measuring correctly. I know this is kind of vague, but I figured I'd ask for pointers here, since I haven't encountered this before. Feel free to delete if this is against forum rules
Built the Degenerator, everything seemed good upon first test, but then I realized there's something up with my Delay time pot. Full CCW, it works as intended. As I turn CW, it continues to work as intended, until I get to about 1/4 or 1/3 of a turn, at that point I hear static similar to quickly pulling out a cable quickly, then no delay. Pot is as specified (50kB) and reading it while turning it, it doesn't seem to have any issues and is measuring correctly. I know this is kind of vague, but I figured I'd ask for pointers here, since I haven't encountered this before. Feel free to delete if this is against forum rules