Topics

Just had an epic tussle getting my Pork Barrel working (it was a dodgy connection on the PCB). Now I have a problem with noise.

The LFO has an audible tick that varies with the the rate - does anyone have any idea on how to get rid of it? It is loud enough to make the pedal unusable. Otherwise it is fine, although it does not like being driven and distorts a bit. Plenty of depth.

I have already tried shielding the pots and signal wires from the PCB with copper tape and checking everything is grounded OK.

Help (again)!

Hi,
Looking for some help. I have just built a Pork Barrel (26/9/11 release) but it is not working and proving hard to diagnose. 3101/3007 version. Bypass is OK (!). I am using the indicator mod - LED does not light up at all when pedal activated or depth pot turned up or down.  LED tests OK with a battery. I have checked all connections, cap orientation, values,  and the board for shorts....

I would be most grateful for any ideas on what it might be or suggestions on how I can test it further.

Thanks,
AMW