Here's what I plan on doing for sure in Feb.
Kingslayer (awaiting last prototype, mostly done)
Stage Fright (awaiting last prototype, mostly done)
Collosalus - verified :)
Here's a list of other projects that could be released (these are more or less done with a little more work):
Boneyard
Cherrybomb
Deadpool
DeadRinger
PigButt - IC Muff w/ tone bypass
RumpRoast - sub-mini tube
Harbinger - Univibe
Mudbunny with PCB mounted pots
Nautilus - Mutron iii --- long shot, but possible
FishFace - (filter, sample and hold) - long shot, but possible
So, of the second list, what are people interested in? And, what else (that I have previously mentioned but not listed) are people wanting the most right now? Keep in mind, I will be limited to three, maybe four other projects beyond the three "for sure" ones. Most likely I will need to re-order something by Feb. so we'll see what funds I have available to do all of this.
Please give your feedback since this is an opportunity to decide what's available in February!
RumpRoast!!!
Also, maybe a hint on the Kingslayer? ;)
Rump Roast definitely. Always wanted a Mutron III too.
I'd like to see the Rump Roast project and also the weener wah..or is that planned a little later?
Of the secondary projects, the ones i'd like to see would be the two big muffs, if I had to pick one it'd be the OpAmp though.
Then would be the Mutron III from the maybe pile and the Univibe.
MuTron III
Cherrybomb
univibe
I'd love to see that Reverb project make a comeback...
Jacob
Quote from: bigmufffuzzwizz on January 08, 2012, 02:05:15 AM
I'd like to see the Rump Roast project and also the weener wah..or is that planned a little later?
The Weener Wah is already on "pre-order" for this month. I haven't uploaded the docs yet.
Rump Roast, Univibe, and Muffage ;D
oh yeah, I'd like to see the Reverb project come back too!
awesome. really awesome.
The Fish Face sounds interesting. Am I right to guess that it's similar to the Maestro FSH-1?
Otherwise probably the Harbinger or the Rump Roast
My vote goes for the Rump Roast, and the UniVibe.
Rump Roast ;D
I vote for Pig Butt and Fish Face.
Take that sentence out of context, I dare you.
Quote from: madbean on January 08, 2012, 02:31:23 AM
The Weener Wah is already on "pre-order" for this month.
Damn, I didn't even notice. I'm pre-ordering one for sure.
From the second list, I'm into the univibe the most, especially if there will be a standard enclosure model (I only have one wah shell right now and it's reserved for the wah project). The Mutron would also rule, but I know it's a long shot.
My vote goes to Kingslayer, Rumproast, and Boneyard
I really like the idea of the Fish Face, but that's probably a really complicated project and I've got enough on my plate already
Definitely the Nautilus. and the Fish face sounds cool. even though those are the two that have long shot listed after them. ;D Also the harbinger. Definitely the harbinger.
RumpRoast - sub-mini tube
FishFace - (filter, sample and hold) - long shot, but possible
^^^^
definitely these two - and either of the muffs would be awesome
also - any word on when the fatpants is coming back?
1. Harbinger - Univibe
2. RumpRoast - sub-mini tube
3. Harbinger - Univibe
And dreaming of a reverb-project!
My vote goes for the Boneyard, Univibe, and the two muffs.
I would like the Univibe.
The return of the Quadrovibe and a reverb project would be great.
RumpRoast - I think this would bring you in plenty of business.
The Boneyard would be cool, but there is so much cool stuff already! My pedalboard is gonna be 10 ft long if I build everything I like.......
I know they aren't on the list but I'd like to see fabbed boards for the Quadrovibe and the Tilt.
From the list I'd like to see:
Harbinger - Univibe
Nautilus - Mutron iii
FishFace - (filter, sample and hold)
In addition to the three confirmed ones, I'd like to see these:
DeadRinger
Harbinger
Nautilus
Boneyard and minitube rump!
Josh :)
i'd say univibe, big muffs and the mini tube amp.
madbean, can you add to the mudbunny pads to add focus & miss controls like the musket fuzz?
that would be so cool
Kingslayer
Boneyard
Rump Roast
Harbinger
reverb would be nice too
1. Harbinger - Univibe
2. RumpRoast - sub-mini tube
3. Harbinger - Univibe
:)
Rump Roast
Fish Face
PCB mounted pot BMP (< any chance of having the mid pot AND a tone removal switch?)
Cherry Bomb
Rump Roast
Quote from: maysink on January 08, 2012, 06:15:20 PM
PCB mounted pot BMP (< any chance of having the mid pot AND a tone removal switch?)
Any chance of not having a board mounted mids pot? ;D
Sorry man! Gotta try for what I want too and that is a mod that can be added easily without pads for the pot.
Tone Bypass switch is cool though.
Harbringer, Pig Butt and FishFace sound like the ones I'd go for.
Rump Roast, please.
Moodring
yay for the FishFace! I've always, ALWAYS wanted a FSH! It's actually the circuit that spurred the idea in my brain of building pedals myself.
Harbinger, nautilus, and rump roast.
harbinger
rump roast
boneyard
Harbinger
Rump Roast
PigButt
And I would love to see a reverb project! ;D
Rump Roast and Fish Face are the two that stand out for me most.
Looking forward to the new projects!
Rump Roast
Harbinger!
Geez, just when I was contemplating taking a break from building... :o
big muffs
harbinger
Boneyard and rumproast get my vote.
Harbinger, Stage Fright and Kingslayer!!! and anxiously awaiting for the Pre-orders Yay!
All this stuff....My kid will be 8 by the time I finish
oy vey
My top three:
1) Harbinger
2) PigButt
3) Nautilus
I'd also be interested in Rump-Roast and Deadringer, depending on how much money I have to spare in February. And the three confirmed projects sound cool as well. Basically I'm very excited by all of this. :)
I'll for sure be getting the Kingslayer and Stage Fright, the PigButt, Nautilus and FishFace would be my top 3 options from the second list.
edit: Also, I've seen handy 3pdt pcbs elsewhere for cleaner/easier wiring, something like that would be rad too.
maybe i'm a little slow, but there's one thing i didn't get: what's a KingSlayer?
Quote from: pietro_moog on January 10, 2012, 11:15:14 PM
maybe i'm a little slow, but there's one thing i didn't get: what's a KingSlayer?
I believe it's a Klon-like build
Will be ordering all the first three definites, so dont need to endorse those further.
On a flanger mission after doing the Current Lover :)
Love phasers, so really up for your take on it, and seeing as I got into this game too late for a sunking, im holding out for this Kingslayer rather than etching a sunking for now.
Of the possibles, I wanna be frank and say the Big Muffs, overdriver and fuzz wouldnt really interest me too much - got too many options for these, and Id rather see some modulation or other hard to do by vero projects.
The RumpRoast might be interesting depending on parts ease of sourcing.
So, I would vote for (and order if available)
DeadRinger - cos I always thought id like to see what the fuss was about
Harbinger - Univibe...nuff said really.
Fish Face - cos it sounds really intriguing
Will order the top three for sure, my votes for the other three would be
Deadringer (I don't need another dirtbox, but when has need ever factored into the equation)
Harbinger (Haven't built a vibe yet)
Rump Roast (Can never have enough boosters)
I too wouldn't mind seeing the mysterious reverb project everyone seems to mention, my DIY board (which is rapidly becoming my number 1 board) is a little naked without it.
Quote from: pietro_moog on January 10, 2012, 11:15:14 PM
maybe i'm a little slow, but there's one thing i didn't get: what's a KingSlayer?
I Googled kingslayer out of curiosity, because my first thought was Kerry King, guitarist for Slayer...
Im just hoping to see the reverb resurface
Quote from: aziltz on January 11, 2012, 01:27:13 PM
Quote from: pietro_moog on January 10, 2012, 11:15:14 PM
maybe i'm a little slow, but there's one thing i didn't get: what's a KingSlayer?
I Googled kingslayer out of curiosity, because my first thought was Kerry King, guitarist for Slayer...
same thought. at first i imagined a jcm800 emulator, but that makes no sense.
i don't know, i'm curious.
I'm in for
Stage Fright, Nautilus and FishFace
There's also the possibility of another delay. I've been working on it for a few days and it sounds pretty damn awesome. It's PT2399 based but it's got some features that no other design has, AFAIK. I started it last year but decided to go ground up on it this week. Biggest feature is the ability to select three different "model" types, analog, tape and one other that I have yet to name. Lastly, I'm trying to work out a faux "tape warble" on the repeats (not modulation exactly, but true up and down pitch bends).
Anyway, just another one to put on the burner.
super-awesome. the only thing we miss now is a 1590B small clone and mxr phasers.
Quote from: madbean on January 12, 2012, 01:03:32 AM
There's also the possibility of another delay. I've been working on it for a few days and it sounds pretty damn awesome. It's PT2399 based but it's got some features that no other design has, AFAIK. I started it last year but decided to go ground up on it this week. Biggest feature is the ability to select three different "model" types, analog, tape and one other that I have yet to name. Lastly, I'm trying to work out a faux "tape warble" on the repeats (not modulation exactly, but true up and down pitch bends).
Anyway, just another one to put on the burner.
This sounds great! I've been tinkering with one with multiple pt2399's in the spirit of the RE201. Still a long way to go, not enough time :)
Josh
Josh
Quote from: madbean on January 12, 2012, 01:03:32 AM
There's also the possibility of another delay. I've been working on it for a few days and it sounds pretty damn awesome. It's PT2399 based but it's got some features that no other design has, AFAIK. I started it last year but decided to go ground up on it this week. Biggest feature is the ability to select three different "model" types, analog, tape and one other that I have yet to name. Lastly, I'm trying to work out a faux "tape warble" on the repeats (not modulation exactly, but true up and down pitch bends).
Anyway, just another one to put on the burner.
This! Make this and I will buy it basically as soon as it exists.
Quote from: madbean on January 12, 2012, 01:03:32 AM
There's also the possibility of another delay. I've been working on it for a few days and it sounds pretty damn awesome. It's PT2399 based but it's got some features that no other design has, AFAIK. I started it last year but decided to go ground up on it this week. Biggest feature is the ability to select three different "model" types, analog, tape and one other that I have yet to name. Lastly, I'm trying to work out a faux "tape warble" on the repeats (not modulation exactly, but true up and down pitch bends).
Anyway, just another one to put on the burner.
+10
I would love another delay
can we have this new digital delay and the mudbunny?
i don't care for anything else now
Quote from: madbean on January 12, 2012, 01:03:32 AM
There's also the possibility of another delay. I've been working on it for a few days and it sounds pretty damn awesome. It's PT2399 based but it's got some features that no other design has, AFAIK. I started it last year but decided to go ground up on it this week. Biggest feature is the ability to select three different "model" types, analog, tape and one other that I have yet to name. Lastly, I'm trying to work out a faux "tape warble" on the repeats (not modulation exactly, but true up and down pitch bends).
Anyway, just another one to put on the burner.
:o
Yes Please...
Quote from: raulduke on January 12, 2012, 06:59:51 PM
Quote from: madbean on January 12, 2012, 01:03:32 AM
There's also the possibility of another delay. I've been working on it for a few days and it sounds pretty damn awesome. It's PT2399 based but it's got some features that no other design has, AFAIK. I started it last year but decided to go ground up on it this week. Biggest feature is the ability to select three different "model" types, analog, tape and one other that I have yet to name. Lastly, I'm trying to work out a faux "tape warble" on the repeats (not modulation exactly, but true up and down pitch bends).
Anyway, just another one to put on the burner.
:o
Yes Please...
x2! Anything tape-like would be awesome.
Quote from: sgmezei on January 12, 2012, 06:55:26 AM
Quote from: madbean on January 12, 2012, 01:03:32 AM
There's also the possibility of another delay. I've been working on it for a few days and it sounds pretty damn awesome. It's PT2399 based but it's got some features that no other design has, AFAIK. I started it last year but decided to go ground up on it this week. Biggest feature is the ability to select three different "model" types, analog, tape and one other that I have yet to name. Lastly, I'm trying to work out a faux "tape warble" on the repeats (not modulation exactly, but true up and down pitch bends).
Anyway, just another one to put on the burner.
+10
I would love another delay
another +10...it'd be a cool replacement for my echo park
I'm tryin to build up my chops for a [few] delay build
...
I think I've got double delay time worked out on this, as well. It's starting to come together pretty well.
please madbean, give us this in february.
Quote from: madbean on January 13, 2012, 02:18:11 AM
I think I've got double delay time worked out on this, as well. It's starting to come together pretty well.
Awe... Awe... Awe...
Some... Some... Some...
:D
Quote from: madbean on January 13, 2012, 02:18:11 AM
I think I've got double delay time worked out on this, as well. It's starting to come together pretty well.
May I sum up my feelings towards this project with a short video?
Any news on what the final list of releases will be, Mr Bean??
Not for another week or two. I'm working steady on the projects, though, so things are movin along.
Another two votes for pig butt and rump roast! Side note - I'm very excited weener in!! In a few weeks I'll have something to fill up my cry baby! Woohoo!
Delay is ready for a prototype PCB! Finally took it off the breadboard.
oh my.....YESS PLEEEASSSE
And this is the "JR" version which will have a subset of the DX version and go in a 1590B. This one will require 1/8W resistors, monolithic and tantalum caps, but they are common values.
And lastly the "DD" version which has dual delay but no modulation.
Gee, are three versions too many?
DX, DX Jr, DD.
if i get it right:
DX is dual,delay with modulation.
Jr is delay with modulation
DD is double delay with no modulation.
The switch triggers 3 mods on the first?
The rotary switch chooses between 4 different repeat modes. The DD also has tails or true bypass operation. The JR and DD versions have only the "tape" mode for repeats.
Clear!
Looks fun.
So that's more DX, DD junior & DD.
DD would be some kind of doubled delay echo base workalike?
Quote from: madbean on January 20, 2012, 04:54:29 AM
Delay is ready for a prototype PCB! Finally took it off the breadboard.
brilliant.
impressive as always madbean
Quote from: madbean on January 20, 2012, 08:20:06 AM
The DD also has tails or true bypass operation. The JR and DD versions have only the "tape" mode for repeats.
This would completely resolve my need for an Echo Base which I've wanted so long. You wrote DD twice, is it DX that's gonna have the tails option? I've been wanting an ultimate delay for awhile now!
double delay as in, this is gonna have a ping pong option ?
Quote from: Ang3lus on January 20, 2012, 09:59:52 PM
double delay as in, this is gonna have a ping pong option ?
No, it's two PT's in series. The maximum delay will be limited to about 700ms or so but that can be altered if you want the full 1sec.
My vote Goes for:
Rump Roast
Nautilus
Deadringer
Quote from: madbean on January 20, 2012, 06:06:06 AM
Gee, are three versions too many?
It is quite a few! If I was gunna drop one it'd be the DD.
But the DX Sounds cool!
Is the Deluxe Aqua Boy still gunna be on the cards with these?
Quote from: Scruffie on January 21, 2012, 06:33:07 AM
Quote from: madbean on January 20, 2012, 06:06:06 AM
Gee, are three versions too many?
It is quite a few! If I was gunna drop one it'd be the DD.
But the DX Sounds cool!
Is the Deluxe Aqua Boy still gunna be on the cards with these?
Yeah, the Aquaboy is still happening. I am going to spend a little extra time on it so most likely it will come in the March batch.
I'm in for the new digital delay.. It'll be perfect with all these options!! ;D Thanks, Brian!
Rump Roast and Harbinger!
PIG BUTT!
PIG BUTT!
PIG BUTT!
Got my Wah board today!! cannot wait to get it started!! thanks!!!
I vote Harbinger & Boneyard. Very excited about all the new projects coming out especially Kingslayer, Weener Wah, & Harbinger.
I vote Fish Face.
do we have a release date for february?
the KingSLayer, as long as it's what I think it is (hope it is) :)
nautilus, fish face, dead ringer!
I don't see all of these on the projects page- how do you guys know what they are/do?
C
1: Aquaboy Deluxe
2: Harbinger (Univibe)
3: Rump Roast
Waiting patiently for the Aquaboy deluxe.
I need this pedal.
Aquaboy Deluxe (as well), Kingslayer, Harbinger (Univibe), Road Rage. Cued and ready to go!
Quote from: madbean on January 08, 2012, 01:46:06 AM
Collosalus - verified :)
Is this schematic still fairly close? Will we really need 15uF caps?
www.madbeanpedals.com/forum/index.php?topic=3057.75
And is there any way you can say what pots the stage fright will use and if they're pc mounted?
Thanks!
Kingslayer, Pig Butt, Mudbunny
OT but I see the Aquaboy (not the Deluxe version) is no longer marked as 'discontinued' but instead has a forecast release date of 2012??
Quote from: Jack5 on February 14, 2012, 11:53:12 AM
OT but I see the Aquaboy (not the Deluxe version) is no longer marked as 'discontinued' but instead has a forecast release date of 2012??
I'm going to re-release it with a new layout. The new design will be a 1590BB and be a much easier build...no standing resistors. It will still have the BBD jumpers for using different chips. The idea being that it will be the "simple" analog delay, and the Deluxe will have the larger feature set (2x delay, on-board modulation, tails). There will also be an add-on modulation PCB that will fit in easily with the new AB design similar to the older add-on boards. It's called the "AquaBaby" heh heh.
This is great. Probably a bit late but I would be voting for the Aquaboy if it was a candidate for next batch of releases. I have a MN3005 on standby for it already. Collosalous second.
Quote from: thetinnedman on February 02, 2012, 03:39:54 AM
the KingSLayer, as long as it's what I think it is (hope it is) :)
What do people think the Kingslayer is?
Otherwise RumpRoast - minitube and Mudbunny
Quote from: Jack5 on February 15, 2012, 09:52:33 AM
What do people think the Kingslayer is?
Successor to the Sunking. At least I hope ;)
Even though it now says 'not a klon'?
The last batch of prototype PCBs got here yesterday, so I will be wrapping up everything and making a decision this weekend on what to release. Obviously, these are "March" releases now, not Feb. Anyway, I think I will have the final list on Monday or Tuesday.
8)
Deadringer
Boneyard.
I seem to be a sucker for dual channelish type pedals...
Kingslayer Please!!!!!
ZeroPointDX Please!!!!
Tooo many awesome choices here - This place is costing me money - And i Love it!!!!
it's march isnt it?
Quote from: claytushaywood on March 16, 2012, 06:29:11 PM
it's march isnt it?
And April is comming up FAST. Time flies.
At this point pretty much anything, I'm almost caught up and need the next batch!
cAVe dWeLLeR !!! :-*
i am mentally preparing myself for the first half of may.
Hey guys- I'm finalizing the latest batch now. There will be something for everyone, but not as much as I hoped. By that, I mean the number of new projects and re-orders needed now far exceeds my ability to fund them in one fell swoop (probably around 20 total). I know people are anxious so I'm doing my best to push as much out there as possible.
Couple things to keep in mind- 1) Each batch of projects I release is generally a couple thousand dollars of investment (sometimes more). Obviously, that's the 'cost of business' but sometimes it's hard to do that kind of thing on a monthly schedule. I think in the next few months I actually will be able to maintain a 4-6 week schedule, though 2) Even though not everything I want to get out now will get out (right now), I think there's a strong possibility of a second release much sooner to take care of the leftovers. IOW, not as long of a wait as it has been from the last batch. 3) Not to brag (well, too much) but also keep in mind that no one else out there manages to compete, or even come close, to the number of releases that MBP does...... :) Maybe that's a gloat...nevermind!
Please stay tuned for an announcement here in a day or so. Thanks to all for their contribution in this thread. I will keep providing the opportunity in the future, of course.
You have a right to gloat or brag or whatever. You are DA MAN! Thanks for all the hard work.
i'm sorry Madbean. i didn't think about the financial aspect.
but the things is that you show us all those marvelous pedals and naturally we want them like crazy!
and then we wait and this thing really consume us. at least this what i'm in, i check the site everyday since months.
i'm sorry i broke your balls
Quote from: timbo_93631 on March 17, 2012, 05:12:49 AM
You have a right to gloat or brag or whatever. You are DA MAN! Thanks for all the hard work.
WORD!!
SOULTRANE !!!
I know, not on the list . . . but I want it !!!
;D
any word on the status of the Stage Fright. I'm really looking forward to building a few.
ZZ
Yes, it will be coming soon. I will be changing things up for the next few months so I plan on releasing less projects at once, but more frequently--hopefully 2 or 3 new ones per month plus whatever needs to be re-stocked. So, I expect the Stage Fright will be one of the next.
what about the digital delay, the one with 2 pt2399 that fits in a 1590b box?
is it going to be out soon?
DeadRinger and KingSlayer.........for sure!! 8)
Harbinger, Aquaboy Plus and Retrograde???? Are they still going to be released?
Whoa, I just saw that the FSH was in development!
Quote from: headhunter53 on May 30, 2012, 10:32:21 AM
Harbinger, Aquaboy Plus and Retrograde???? Are they still going to be released?
Came here to ask the same thing.
The aquaboy deluxe prototype sounded great on youtube
I'm currently working on a BL3208 implementation of the Aquaboy to see how it compares to the v3205. I'll post something in the Project Development blog once I have some solid results to report.
what improvements does the KingSlayer bring? I mean It's not a Klone But it's obviously based on it, isn't it?
http://www.madbeanpedals.com/forum/index.php?topic=5551.msg47887#msg47887
Quote from: Ang3lus on January 08, 2012, 03:53:59 PM
1. Harbinger - Univibe
2. RumpRoast - sub-mini tube
3. Harbinger - Univibe
:)
Harbinger
Harbinger
Pig Butt
Harbinger Please. Thank you!
Will there be more Boneyards ?
+1 to the boneyard. Loved to get the AC Tone in a small box
Another project I loved to see with Brians touch would be the MS20 resonant filter like they're doing at DIYsb http://www.diystompboxes.com/smfforum/index.php?topic=97062.0
its now the 14th.......wheres the neutron boards????
Quote from: bobcatbrown520 on October 15, 2012, 03:22:16 AM
its now the 14th.......wheres the neutron boards????
At GGG? ;)
Still waiting for the manufacturer to ship the new boards.
Hello everyone,
this is my first post.
Been lurking here for a while, have never posted. Am fairly new to this hobby, have built a handful of pedals so far, they all work but nothing special. This is a great place to learn.
Will place a large order with Madbean once the restock is in, hope everything else will still be available then.
And I'm sure I will post more when building more.
Beans,
I was about to start sourcing parts for a loophole looper, but I just noticed the loophole looper II on the main projects page as an "upcoming" project... is that one getting close?
I already have a line-6 jm4 looper, but its the only pedal not made by me on my board.... and I don't really need all that fancy modeling in my looper.
Just trying to decide if I should wait... and what are the specs on the loophole II?
It's not close at all. I have yet to do any work on it...sorry. I definitely will do it, but maybe not before the end of the year.
Do you intend to use the same chip for the loophole II or possibly go with the ISD1600B ? though I cant figure out where to buy it, it looks like you can get 40 seconds at 8 bit in a through hole package.
Another thought would be to get one of the high fidelity chips, and use something like an arduino mini or a mega 328 to control it.
what about univibes and Stage Fright? are they ready yet? is there a schedule for the release?
i want those so bad.
are we there yet? are we there yet? are we there yet?...lol
November will be delays, December will be filters/modulation.
Cool, my birthday is November. Presents to myself.
Quote from: jkokura on January 08, 2012, 02:18:04 AM
I'd love to see that Reverb project make a comeback...
Jacob
Quote from: jighead81 on January 08, 2012, 02:38:11 AM
Rump Roast, Univibe, and Muffage ;D
oh yeah, I'd like to see the Reverb project come back too!
And me too...!!! REVERB
I'm tempted to build a Ross Phaser (cool moddable project indeed)... But I wait for the stage fright... Should be better of sure!
Ditto...definately Stage Fright!!!!
Yeah Stage Fright Time !
Mich P.
What dose Stage Fright do?
Quote from: Pvt. Parts on November 05, 2012, 07:49:16 PM
What dose Stage Fright do?
I think it will be a 6 stage phaser based on the maestro. It might include a switch that changes a couple of caps so you can get univibe sounds too. Sounds very exciting.
edited to say
It might include a switch instead of
I might include a switch. lol
OMG, and you tell me this now that I'm making my Phaser 90 :(
Quote from: Pvt. Parts on November 05, 2012, 08:03:32 PM
OMG, and you tell me this now that I'm making my Phaser 90 :(
I know man, I know. I've already built a 45, a 90 and I'm trying everything in my power not to build a ross right now. I think I'm going to hold out for the stage fright though. should be awesome!
Any word on the HoneyDripper and Leviathan? Can't wait to order those boards!
They will be in the next batch. I'm placing the order at the end of this week, I think. So, we'll go right up to the end of the month on the release date.
how about a acoustic sim?
Quote from: jeffaroo on December 02, 2012, 12:18:18 AM
how about a acoustic sim?
That sounds cool. Maybe a piezo preamp ala graph tech ghost?
I vote for the rump roast and the Mutron ii (if i'm not to late ;)).
I just noticed the Leviathan is gone and is now the Zero Point Mini due in december. Eh?
Turns out there is a Leviathan pedal already. It's a fuzz, but I thought it best to change the name. Since it has the same bones as the other two Zero Points I just re-named it the ZP Mini.
cool!
any chance you could release the documents for the Zero Point Mini (Leviathan)? If not, no worries, but I'd like to order a bunch of parts soon and would love to know what to order for the Zero Point Mini.
Also gonna build a smoothie! With vibe switch and mix pot!
I will post the BOM for all the new projects by the end of this week. There are still a couple things I'm sorting out so some values might change here in the next couple of days. Just a little last minute tweaking.
Hey Brian, you're obviously busy with 30 different projects, but just out of curiosity, what happened with the mandroid?
Quote from: monkeyssj1 on December 04, 2012, 07:27:04 PM
Hey Brian, you're obviously busy with 30 different projects, but just out of curiosity, what happened with the mandroid?
Oh, I will still be doing that. I ran into a bit of trouble with the idea for the design and have not picked it back up yet. But, I will take another look at it probably in January.
Sigh, still waiting on that loophole... and I'm really in need of a good reverb too. You know I was thinking it could be based on the cave dweller as it does do a great cavey reverb at certain settings and then I just found your post about basing on the same thing.
I definitely want a cavernous chorus. Any reason you did not want to go with the new brick?
hey Monkey.....Brian said he has your Mandroid right here ! (slightly grabbing and shaking crotch )
Quote from: jeffaroo on December 14, 2012, 08:02:03 AM
hey Monkey.....Brian said he has your Mandroid right here ! (slightly grabbing and shaking crotch )
too f-n funny! ;D
I am looking forward to the Harbinger One! I am super excited!
My vote is Boneyard, Rump Roast and Fish face ;D
ct
Rump roast man... Need that sub mini tube amp... Or two
yup, ive got my tubes ready for the roast!
All of em!!!! ;D