I think I posted this in the wrong forum originally (general questions vs. tech help). I couldn't figure out how to move the post, so I'm copying it here. I'm working on my first delay, the Total Recall, and I've got some wacky voltages. I was hoping someone smarter than me could help me figure out where to focus my troubleshooting efforts. Any help would be appreciated. Thanks!
Jon
Second half of voltages
Not sure why my pictures are upside down...anyway, hers a list of my voltages.
IC1
Pin1. -7.48
Pin2. 0
Pin 3. -7.1
Pin 4. -14.8
Pin 5. -12.2
Pin 6. -11.3
Pin 7. -13.4
Pin 8. 0
IC2
Pin1. -13.45
Pin2. -13.0
Pin 3. -12.9
Pin 4. -14.8
Pin 5. -12.9
Pin 6. -12.7
Pin 7. -4.4
Pin8. -12.9
Pin9. -12.9
Pin10. -6.8
Pin11. -8.5
Pin12. -12.9
Pin13. 0
Pin 14. -12.9
Pin15. -12.9
Pin 16. -13.5
Ic 3
Pin1. -6.0
Pin2. -3.0
Pin 3. -3.4
Pin 4. -14.8
Pin 5. -7.2
Pin 6. -7.4
Pin 7. -7.4
Pin 8. 0
IC 4
Pin1. -7.4
Pin2. -7.4
Pin 3. -7.6
Pin 4. -14.8
Pin 5. -7.0
Pin 6. -7.0
Pin 7. -7.2
Pin 8. 0
IC5
Pin1. -7.4
Pin2. -7.4
Pin 3. -7.2
Pin 4. -14.8
Pin 5. -6.1
Pin 6. -6.8
Pin 7. -7.0
Pin8. 0
IC 6
Pin1. -0
Pin2. -7.4
Pin 3. -8.9
Pin 4. -8.9
Pin 5. -15
Pin 6. -7.5
Pin 7. -6.0
Pin 8. -13.7
IC 7
Pin1. -0
Pin2. -7.5
Pin 3. -9.3
Pin 4. -9.4
Pin 5. -15.0
Pin 6. -7.5
Pin 7. -7.2
Pin8. -13.9
IC8
Pin1. -7.8
Pin2. -7.0
Pin 3. -6.9
Pin 4. -0
Pin 5. -0
Pin 6. -0
Pin 7. -15.0
Pin8. -15.0
Pin 9. -15.0
Pin 10. -7.5
Pin11. -7.5
Pin 12. -15.0
Pin13. -7.8
Pin14. 0
IC9
Pin1. -.05
Pin2. -8.1
Pin 3. -8.1
Pin 4. -15.0
Pin 5. -8.1
Pin 6. 0
Pin 7. -13.6
Pin8. 0
IC9
Pin1. -.05
Pin2. -8.1
Pin 3. -8.2
Pin 4. -15.0
Pin 5. -8.1
Pin 6. -0
Pin 7. -13.6
Pin8. 0
Regulator
I -25.57
G 0
I -15.0
IC1 Pin 2, 5,6 & 7 are all off, start checking there.