Print Page - newbie

Title: newbie
Post by: foochild on February 24, 2015, 04:21:56 PM

Hello, I'm new to the site. Right now I'm trying to build a Grind Customs Chimaera and I am having trouble finding good instructions on the wiring. Any comments would help.

Thanks

Title: Re: newbie
Post by: Stomptown on February 24, 2015, 04:28:05 PM

Welcome! Here is the madbean standard wiring diagram that most people around here use for their wiring. It will work fine for the Chimera or any other +9V effect pedal using true bypass. If you do not want a battery, just ignore that part of the wiring diagram. Not using a battery would also mean that you could use a mono jack instead of a stereo jack if you want (a stereo jack will still work but is not necessary).

http://madbeanpedals.com/tutorials/downloads/StandardWiring_MBP.pdf

Title: Re: newbie
Post by: Govmnt_Lacky on February 24, 2015, 04:28:28 PM

Hello,

Rej happens to have his very own area for Grind Customs products here on MBP. Take a look here and try posting a new thread and I am sure he will help you out.

http://www.madbeanpedals.com/forum/index.php?board=73.0

Welcome BTW... ;)

Title: Re: newbie
Post by: Leevibe on February 24, 2015, 04:30:32 PM

What they said.

Welcome!

Title: Re: newbie
Post by: foochild on February 26, 2015, 01:53:22 AM

Thanks! I really appreciate it.

Title: Re: newbie
Post by: jimilee on February 26, 2015, 02:28:36 AM

The chimaera is a little different if you don't wire it true bypass though. :-)

Sent from my iPhone using Tapatalk

Title: Re: newbie
Post by: Stomptown on February 26, 2015, 03:37:07 AM

Quote from: jimilee on February 26, 2015, 02:28:36 AM
The chimaera is a little different if you don't wire it true bypass though. :-)

Sent from my iPhone using Tapatalk

oOps! I completely forgot about that!

madbeanpedals::forum

General => Open Discussion => Introductions => Topic started by: foochild on February 24, 2015, 04:21:56 PM