Hi, I've got 3 of each type of MN3007 and MN3101 that are all from different but trusted sources. the mn3101's i have tested in a delay and work well. the MN3007's are known to work from a past chorus build. I cannot for the life of me work out whats going on, could someone please cast an eye over my board and check the voltages I'm getting? thanks in advance.
Voltages are as follows:
TL062cp
1=8.58v
2=0.3mv
3=8.57v
4=0.4mv
5=0.3mv
6=6.25v
7=8.58v
8=9.25v
JRC4558
1=4.45v
2=4.46v
3=4.45v
5=4.46v
6=4.45v
7=4.45v
8=9.25v
MN3101:
1=9.15
2=4.66
3=0.4mv
4=4.71v
5=315mv
6=8.15v
7=2.5v
8=0.619
MN3007
1=9.16v
2=4.72
3=3.76
4=0.62v
5=0.4mv
6=4.68v
7=3.74v
8=3.74v
Hopefully this is enough for a kind hearted individual to help me fix this bugger!!
Voltages are as follows:
TL062cp
1=8.58v
2=0.3mv
3=8.57v
4=0.4mv
5=0.3mv
6=6.25v
7=8.58v
8=9.25v
JRC4558
1=4.45v
2=4.46v
3=4.45v
5=4.46v
6=4.45v
7=4.45v
8=9.25v
MN3101:
1=9.15
2=4.66
3=0.4mv
4=4.71v
5=315mv
6=8.15v
7=2.5v
8=0.619
MN3007
1=9.16v
2=4.72
3=3.76
4=0.62v
5=0.4mv
6=4.68v
7=3.74v
8=3.74v
Hopefully this is enough for a kind hearted individual to help me fix this bugger!!