News:

Forum may be experiencing issues.

Main Menu

Deathclaw unity gain issue

Started by Marshall Arts, April 18, 2017, 01:21:54 PM

Previous topic - Next topic

Marshall Arts

I built a deathclaw delay and found out, that it is a little bit louder in true bypass than when the effect is active. just before I start modifying my PCB - can anybody confirm, that I can INCREASE the volume of the effect by increasing R5 (currently 15k, I would try 18k, 22k or 27k or even a trim pot).

madbean

That's exactly right. Increase R5 to 20k or 22k will probably do it. Honestly, I think all circuits are better with a volume output to account for different pickup types and outputs but in this case there just wasn't room on the PCB to include one.

Marshall Arts

Thanks to the master himself ;-)