News:

Forum may be experiencing issues.

Main Menu

My First Madbean Build: Rock'n a Box (a.k.a The Krankosaurus)

Started by FuzzMonkey, December 14, 2010, 06:13:20 AM

Previous topic - Next topic

FuzzMonkey

Greetings All,

I'd thought I'd share with you some images of my first Madbean build, what I call the Rock'n a Box:







Just like the original but I've added the LEDs (therefore the wiring of the switches etc differs from the original also) and I had to sub C8 and C9 with 2n2 capacitors as I couldn't source any 2n capacitors. I also created a couple of PCBs for the switches to try and keep the wiring a little tidier. Things were a little tight inside but a great sounding pedal and highly recommended build! Thanks Brian.

Any comments welcome.

~ FM.

jackbart1960


madbean

OMG, this is great! I have to admit, I'm a Spongebob fan. My four year old loves this show, so I think I must have seen (or heard) every episode two or three times.

Very nicely done with the graphic and the guts. I'm curious about the decal, too. It seems too high quality for inkjet...the colors are vibrant.

nzCdog


jackbart1960

Quote from: madbean on December 14, 2010, 01:04:49 PM
Very nicely done with the graphic and the guts. I'm curious about the decal, too. It seems too high quality for inkjet...the colors are vibrant.
+1

FuzzMonkey

Thank you for the kind words!  :-[

I found these online on while search for options to label my builds:

http://www.youtube.com/watch?v=NX6ZxmDcOJ8

I just used my Inkjet printer set to the best printing settings and a spray of clear lacquer to seal and protect and it was job done!

gtr2

Quote from: FuzzMonkey on December 15, 2010, 05:23:08 AM
Thank you for the kind words!  :-[

I found these online on while search for options to label my builds:

http://www.youtube.com/watch?v=NX6ZxmDcOJ8

I just used my Inkjet printer set to the best printing settings and a spray of clear lacquer to seal and protect and it was job done!

Thanks for sharing the link!  It's always nice to see other ways of doing things. Nice build!
1776 EFFECTS STORE     
Contract PCB designer

FuzzMonkey

Quote from: gtr2 on December 15, 2010, 12:46:16 PM
Quote from: FuzzMonkey on December 15, 2010, 05:23:08 AM
Thank you for the kind words!  :-[

I found these online on while search for options to label my builds:

http://www.youtube.com/watch?v=NX6ZxmDcOJ8

I just used my Inkjet printer set to the best printing settings and a spray of clear lacquer to seal and protect and it was job done!


Thanks for sharing the link!  It's always nice to see other ways of doing things. Nice build!

Thanks. Glad to be of service.  ;D

juansolo

Gnomepage - DIY effects library & stuff in the Stompage bit
"I excite very large doom for days" - playpunk


raulduke