Just like the title says, no sound. It bypasses just fine and then when you switch it on, nothing. I've had a rough couple of weeks with this thing. I built one last month and had it up and running in a couple of hours. I'm determined to make this pedal work. As per suggestion I've:
....And given it a lot of looks with plenty of time in between to clear my head.
Socketed 2N5088 Transistors read as follows:
Q1
C 6.62
B 1.14
E 0.71
Q2
C 6.63
B 1.14
E 0.71
Q3
C 6.12v
B 1.05v
E 0.62v
Q4
C 3.89v
B 1.14v
E 0.58v
Hopefully I can get some better pics tomorrow when I go back to work at the lab... and also take a toothbrush and some isopropyl alcohol to the board to get all the flux off it...
P.S. Yes, the diodes' legs are long... once the fuzz is up and running they're coming out and a switch is going in. Same with C10.
QuoteDouble checked my wiring
Double checked my part values
Double checked my part orientation
Double checked my soldering job
....And given it a lot of looks with plenty of time in between to clear my head.
Socketed 2N5088 Transistors read as follows:
Q1
C 6.62
B 1.14
E 0.71
Q2
C 6.63
B 1.14
E 0.71
Q3
C 6.12v
B 1.05v
E 0.62v
Q4
C 3.89v
B 1.14v
E 0.58v
Hopefully I can get some better pics tomorrow when I go back to work at the lab... and also take a toothbrush and some isopropyl alcohol to the board to get all the flux off it...
P.S. Yes, the diodes' legs are long... once the fuzz is up and running they're coming out and a switch is going in. Same with C10.