Messages

Some cool sh#t there Dave really dig the Mahalia Barnes one.
The swampy stuff is cool too.

Well done! Great build and such a useful circuit I reckon!

Let's build another dirtbox, and to make it count let's put two circuits in to save space or so and for the fun of it....
So here's another 2in1 125B, this time with a Black Cat OD-1 on top (controls are Vol and Gain), the toggle selects between this circuit or in down position the big box ToneBender built to Juansolo's specs that he recently uncovered in an old unit.
Made me curious and yes it sound great!
I added another pot that is the input resistor the can be dialed from 100K to 0 ohm (I jumpered R1 on this to have the full range). On Juansolos tracing it was 39 K, on 1776 Suckerpunch it's listed as 33 K. This makes it adjustable and on full bore and high fuzz settings it starts to get a bit crazy in a good way.
I like things to be tweakable, so good for me!

TH Custom Ueberswitch relay board. Dig those!

In case if anyone wants a spare board I have one left each, shipped for $ 10 each anywhere on the planet.

Friggin awesome stuff!!!

Quite a feat and achievement, pulled off beautifully!

Cool!
But wait, what's the problem with guitarists? I can't hear ya...

Very nice and tidy indeed, cool build Paul!

Indeed really cool....! Great build!
Makes me interested in the circuit too...

Awesomeness!

Maybe it also depends what you feed that power converter... my walwart is already reasonably well filtered DC going into the converter, that might help to keep the ripple down.

I have used a similar module, but the step down version to regulate down from 14 V to 9V and it works great.
No problems with hum so far for me.
Maybe you give it a try and see. They are obviously pretty cheap.

Thanks for the comments guys!

This is so compact and condensed , and neat in the same time ! Really impressive device !
Why is the IC of the relay bypass painted red ? I like it ^^

Thomas of THcustom spray paints those chips to mark them as 'ready programmed'. They come with the relay board as well as all other parts.

Beautiful!. I demand a tutorial of your painting techniques, Sir!!  (kidding, but it would be awesome)

I bet people get spechless when they see your pedalboard live.

I'm happy to try to take photos next time I do a run of enclosure swirls, it is just so messy that I don't know yet how to handle the camera while I have rubber gloves on and paint splattering all over... I'll see...
I usually do 20 to 30 enclosure swirls at a time as it is a bit of a setup and messy, that gives me then some stock to work with.
I'm running low now though, so it will be time for some paint slapping fun soonish again.

Madbean Naughty Fish, very faaawnkee sounding circuit, thanks Bean for such a goodie!
The usual hippie swirl paint jobbie, top mount jacks, THCustom Ueberswitch relay switching board.

Very cool indeed! Great stuff, great teamwork!

Friggin super vero shoehorning... very cool!