Schu-Tone Gypsy

[dan.schumaker]

Here is something that I put together this weekend.  I've had the idea kicking around my head for some grab-and-go type boards for a while now.  The Six-Shooter that I posted the other week was a sort of start of that.  I've had a thought for a Hendrix inspired board for a while, but never went ahead and implemented it.  The Gypsy is what I came up with.

The Gypsy is housed in a 1590DD enclosure, and there are 4 circuits in the box.  The first is a SI fuzz face.  Pretty basic SI fuzz, with an added Body (input cap blend) and Contour (mids) control.  This goes into a Roger Mayer Octavia octave fuzz with an added tone control.  There is an order switch to determine if you want the Octave fuzz to go before the SI fuzz or the other way around.  This all goes into a Univibe circuit.  Taking a little bit from the Harbinger 2 and a little bit from the RG Keen UVICS, I modified the vibe to use a single pot for the speed control.  Using a single pot, I have it wired to a switched jack so I can use an expression pedal to control the speed of the vibe.  Its pretty cool!  The end of the chain is a Marshall Amp circuit, pretty similar to the Ramble Drive, with a switch to go from +9V or +18V and a switch to go between 1987, 1959 and JTM modes.

All in all, I am really happy with how this turned out.  For having 18 board mounted parts going into an enclosure, it went together about as well as one could expect!  Using the stacked boards, I am about maxed out on height.  It might be a little more comfortable to put everything in a 1590D (the taller version), but it works just fine in this box.  It sounds really cool, and (if I could sound even 1% like Hendrix) would make for a great grab-and-go or inspired by board.  Unfortunately for me, since this one worked out, I'm on my way to designing a few more "inspired-by" boxes like this.  I already have a Page box designed and ready to go, and am about halfway through doing two separate Gilmour inspired boxes.

[jimilee]

Completely badass Dan. I was wondering about fitting full size multiples in the DD enclosure. I wonder if a mere mortal without your king fu grip can get some in there.


Sent from my iPhone using Tapatalk

[BryGuy]

Super cool! Custom boards I'm assuming. Probably the only way to get eveything in there.

[jjjimi84]

This is super cool! What are you planning for the page and gilmour ones?

I know a guy that would love to shoot a demo of this.

[dan.schumaker]

Super cool! Custom boards I'm assuming. Probably the only way to get eveything in there.

That is correct.  I could have done separate boards for everything, but I find it so much cleaner to do one big board (well, two stacked in this case) for everything.

This is super cool! What are you planning for the page and gilmour ones?

I know a guy that would love to shoot a demo of this.

I'm pretty excited about the Page and Gilmour ones.  The Page box is like the much larger one I did a few years back.  It will have a Tone Bender, Phase 90, Delay, EP-3 Preamp/Boost and a RAH overdrive.  I'm doing a Dark Side and Wall inspired Gilmour board.  The Dark Side board will be a SI Fuzz Face, Powerbooster, Univibe and a Binson style 4-head delay (I just ordered boards of just the delay today and it should be super cool if it actually works).  The Wall inspired board will have a BMP, a Cornish Overdriver (like the Aion Sigma Drive), a Dyna Comp, an Electric Mistress and a PT2399 delay.

And I might have to take you up on your offer of a demo for this...

[Bio77]

Super slick, Dan!    Will V2 have a mini wah? 

[Jay.lingelbach]

Super slick, Dan!    Will V2 have a mini wah? 

Fold out voice activated full sized wah.


Sent from my iPhone using Tapatalk Pro

[matmosphere]

What is this witchcraft?! Dangalf the grey strikes again.

That looks excellent!!

[jjjimi84]

Here is a little video showcasing this thing, it is some of my favorite recorded sounds I have gotten in this room and I really appreciate Dan for letting me take it for a spin.
https://youtu.be/KnbKEuTsIYk