2010 Sunking v2 docs needed

[warriorpoet]

Halp!

[madbean]

This is in the Sunking.zip archive which is linked on the Projects Page.
http://www.madbeanpedals.com/projects/ARCHIVE/OD_Dist_Boost/

[warriorpoet]

This is in the Sunking.zip archive which is linked on the Projects Page.
http://www.madbeanpedals.com/projects/ARCHIVE/OD_Dist_Boost/

Thank you, Brian. The one I have isn't in there, unfortunately. It says Sunking 1 ver.2 (c)2010 on top, and appears to use all 1/8w resistors.

Just checking, do the part numbers line up with the other files?

Personally, I could figure it out, but I'm sending this to a beginner

[madbean]

Ah, okay. I made a mistake in the archive - I had the etchable layout named as the "fabbed" ver.2.

Okay, I have fixed the zip. The ver.2 you are looking for is now in there and labeled "ver.2". Sorry about that.

http://www.madbeanpedals.com/projects/ARCHIVE/OD_Dist_Boost/Sunking.zip

[warriorpoet]

Ah, okay. I made a mistake in the archive - I had the etchable layout named as the "fabbed" ver.2.

Okay, I have fixed the zip. The ver.2 you are looking for is now in there and labeled "ver.2". Sorry about that.

http://www.madbeanpedals.com/projects/ARCHIVE/OD_Dist_Boost/Sunking.zip

Perfect! Thank you so much!