LectricFx Dandy Horse Musikding Parts Help

[Pish]

Hey!
I got the Dandy Horse kit from Musikding and the BOM says that the feedback pot should be A10K but they sent me a C10K. Is this right or should I replace it with what the BOM asks?

Is the build guide out of date or have they subbed a part in to get the kit out to me. (Also other bits missing but not the end of the world, tho, this seems to be a consistent theme with them for me)

Cheers crew!

[jimilee]

Sounds like a part was subbed, BUT the C10 will give you a little more control than the A10.

[Pish]

Am I right in saying that the inverse here is same as reverse?

So not much change between no feedback (at full resistance) and 2 but better smoother control for the rest of the range?

https://eepower.com/uploads/education/potentiometer_taper.png

[jimilee]

Yes


Sent from my iPhone using Tapatalk

[jwin615]

Your bunching of control will be at minimum feedback setting with the C taper. That will allow finer control I. The medium to maximum feedback range.
With an A taper, the opposite would be true.