madbeanpedals::forum

Projects => Build Reports => Topic started by: jimmybjj on July 12, 2010, 09:33:49 PM

Title: Krunkee
Post by: jimmybjj on July 12, 2010, 09:33:49 PM

Not really a report, just a picture  ;D  I forgot to take gut shots before i put her together (you don't wanna see that mess anyway  ;D)

(http://lh3.ggpht.com/_yFex0loOVcw/TDFJY6duYsI/AAAAAAAAAuY/E5yPBp0L1ts/s800/DSC00483.JPG)
Title: Re: Krunkee
Post by: pauloman80 on July 13, 2010, 05:40:45 PM
That is pretty darn slick.  How'd you do the LED setup?  That's fantastic.
Title: Re: Krunkee
Post by: cleanclang on July 13, 2010, 06:11:11 PM
That's AMAZING!!! And, yes, how did you do that LED set-up?
Title: Re: Krunkee
Post by: jimmybjj on July 13, 2010, 07:23:51 PM
thanks guys. The lighting isn't hard a all, just requires a little effort. The epoxy finish was way more frustrating.

http://www.diystompboxes.com/smfforum/index.php?topic=66840.0
Title: Re: Krunkee
Post by: pauloman80 on July 15, 2010, 06:07:00 PM
Quote from: jimmybjj on July 13, 2010, 07:23:51 PM
thanks guys. The lighting isn't hard a all, just requires a little effort. The epoxy finish was way more frustrating.

http://www.diystompboxes.com/smfforum/index.php?topic=66840.0

That is slick

My only question would be what grade sandpaper to use on the LED.  What did you use?
Title: Re: Krunkee
Post by: jimmybjj on July 16, 2010, 02:20:19 PM
Quote from: pauloman80 on July 15, 2010, 06:07:00 PM
Quote from: jimmybjj on July 13, 2010, 07:23:51 PM
thanks guys. The lighting isn't hard a all, just requires a little effort. The epoxy finish was way more frustrating.

http://www.diystompboxes.com/smfforum/index.php?topic=66840.0

That is slick

My only question would be what grade sandpaper to use on the LED.  What did you use?
to be honest I didn't sand the led and it worked great. I'm still a newbie but I didn't know LEDs light was directional, is it?
Title: Re: Krunkee
Post by: pauloman80 on July 16, 2010, 06:56:14 PM
Quote from: jimmybjj on July 16, 2010, 02:20:19 PM
Quote from: pauloman80 on July 15, 2010, 06:07:00 PM
Quote from: jimmybjj on July 13, 2010, 07:23:51 PM
thanks guys. The lighting isn't hard a all, just requires a little effort. The epoxy finish was way more frustrating.

http://www.diystompboxes.com/smfforum/index.php?topic=66840.0

That is slick.  

My only question would be what grade sandpaper to use on the LED.  What did you use?
to be honest I didn't sand the led and it worked great. I'm still a newbie but I didn't know LEDs light was directional, is it?

Well, it was suggested in the tutorial you linked to.  The LEDs I use definitely shine wayyyy brighter through the rounded top, especially the blue ones.  Looks like you got a good result anyway!  I'll have to try both ways, see if it makes a difference.

EDIT: BTW, what thickness of Plexi did you get, and where?
Title: Re: Krunkee
Post by: nicobrewis on July 18, 2010, 04:50:36 PM
That is one cool looking pedal ..10/10 for creativity !
Title: Re: Krunkee
Post by: gmr1 on July 18, 2010, 10:12:24 PM
looks great!

in regards to sanding LEDS - those green scotchbrite bads work awesome.
Title: Re: Krunkee
Post by: cleanclang on July 19, 2010, 08:00:27 AM
Something I've not been able to ascertain (probably because I'm an idiot) is what part of the LED to sand. The whole thing? It seems equivocal from the tutorial.