Hi all, I'm new to pedal building and new to this forum. I recently got into this by taking the challenge of building a pedal and learning about electronics. You can read about my efforts over on the Fretboard forum - http://www.thefretboard.co.uk/discussion/121368/c18q1-learn-electronics-and-build-a-pedal/p1
So, here's my question - I'm using Posca pens for my (cheesy) pedal enclosure artwork and for my first pedal I applied a few layers of Rustoleum Crystal Clear Gloss spray (https://www.amazon.co.uk/Rustoleum-AE0040001E8-400ml-Crystal-Clear/dp/B001W03PRM). This is OK, but I'm wondering if folks here have any other recommendations? The pedal I'm currently working on is housed in a Hammond 1590BB Black enclosure which happens to have a nice matte, textured finish. I don't want to clear coat this with a gloss spray, so need to use something matte. Any tips or recommendations?
So, here's my question - I'm using Posca pens for my (cheesy) pedal enclosure artwork and for my first pedal I applied a few layers of Rustoleum Crystal Clear Gloss spray (https://www.amazon.co.uk/Rustoleum-AE0040001E8-400ml-Crystal-Clear/dp/B001W03PRM). This is OK, but I'm wondering if folks here have any other recommendations? The pedal I'm currently working on is housed in a Hammond 1590BB Black enclosure which happens to have a nice matte, textured finish. I don't want to clear coat this with a gloss spray, so need to use something matte. Any tips or recommendations?