Hey everybody! Here's my Cupcake compressor. I had a botched enclosure (the drilling is about 1/4" off center) and was like, "well, I should put something in there." Everything is stock. This definitely adds some "oomph" to my Tele. I also recorded a short demo. Enjoy!
Outside:
(http://imageshack.us/a/img822/9482/imagegph.jpg) (http://imageshack.us/photo/my-images/822/imagegph.jpg/)
Inside:
(http://imageshack.us/a/img855/7180/imagelmno.jpg) (http://imageshack.us/photo/my-images/855/imagelmno.jpg/)
Video:
https://www.youtube.com/watch?v=FblmCf66goI
Sorry for the blurry pics - they didn't look so bad when I took them with my phone.
nice paint job. i like it a lot.
That is very cool. Is it really that noisy, or was something else going on there?
Quote from: Parra on June 12, 2013, 06:46:35 PM
nice paint job. i like it a lot.
Thanks! My sister drew it with a Sharpie. However, I should have clear-coated it because it smeared a little as I was dry-fitting the off-board components.
Quote from: jimilee on June 12, 2013, 06:52:46 PM
That is very cool. Is it really that noisy, or was something else going on there?
I assume that the hum is a combination of my cheap adaptor (Visual Sound 1-Spot) and that particular outlet in my house (my amp sometimes picks up radio signals when it's plugged into that outlet). Any suggestions for reducing that hum?
Quote from: jimilee on June 12, 2013, 06:52:46 PM
That is very cool. Is it really that noisy, or was something else going on there?
I assume that the hum is a combination of my cheap adaptor (Visual Sound 1-Spot) and that particular outlet in my house (my amp sometimes picks up radio signals when it's plugged into that outlet). Any suggestions for reducing that hum?
[/quote]
Better adapter and a different outlet? :P But seriously I'd try that first before you go building a decimator,although those are cool too!
Very cool graphics man! :o
That is one rad finish.
Your sister's artwork is fantastic! I really like the look of this a lot.
Really love that graphic! 8)