Print Page - Marshall amp simulator

Title: Marshall amp simulator
Post by: billstein on June 12, 2013, 05:08:03 PM

Want to build something that will get me close to the Marshall sound. I'm thinking Hendrix 'Wind cries Mary" or "Hey Joe" sound. Any help would be appreciated.

Title: Re: Marshall amp simulator
Post by: drezdn on June 12, 2013, 05:51:54 PM

I really dig the Marshall-like sounds of the Runoff Groove Thor (http://runoffgroove.com/thor.html). Not a Hendrix expert so I'm not sure if it'll get that specific sound, but the Thor sounds Marshall to me.

Title: Re: Marshall amp simulator
Post by: Mike B. on June 12, 2013, 06:15:32 PM

The Thor is good, but I think the Catalinbread DLS is a bit more versatile. Brian discontinued the Grapevine PCB, which was a DLS clone, but you can still get the etched board from Haberdasher.

http://www.madbeanpedals.com/forum/index.php?topic=2038.0

Title: Re: Marshall amp simulator
Post by: micromegas on June 12, 2013, 06:37:26 PM

or you can build this one and tell me how it goes before I try it...
http://milas.spb.ru/~kmg/jcm800fet_en.html

Title: Re: Marshall amp simulator
Post by: micromegas on June 12, 2013, 06:40:10 PM

if you are brave enough, you can build KMGs emulation of the Bogner Ectasy Preamp (I've heard the blue channel has plexi characteristics...).
http://milas.spb.ru/~kmg/pedalfet_en.html (this one is certainly on my "to do" list)

madbeanpedals::forum

General => Open Discussion => Topic started by: billstein on June 12, 2013, 05:08:03 PM