madbeanpedals::forum

Projects => Build Reports => Topic started by: jalmonsalmon on July 14, 2013, 01:42:24 AM

Title: Mind Bender on vero (non madbean content)
Post by: jalmonsalmon on July 14, 2013, 01:42:24 AM
 Here we have a Tone Bender Professional MK II on vero based off of fuzz central's Mind Bender schematic.
Only difference is I used PNP Germanium transistors instead of NPN GE's and instead of a 1K2 resistor I used a 1K resistor where in a normal Tone Bender there is a 470R.
I highly recommend if you can making one of these or, modding an existing tone bender clone to mind bender specs  ;D
and now the pedal!
(http://i145.photobucket.com/albums/r233/jimijam_photos/DSC_0079.jpg?t=1373730367)

and what lives inside (excuse the wiring, I had yet to learn ninja wiring 101)
(http://i145.photobucket.com/albums/r233/jimijam_photos/DSC_0076.jpg?t=1373730268)
(oh forgot to mention, props to IvIark's site for the layout)
Hopefully some clips soon...
Title: Re: Mind Bender on vero (non madbean content)
Post by: jprizz on July 14, 2013, 02:16:51 AM
Looks good! What kind of finish is that? It looks sort of like a wrinkled or textured finish.
Oil
Title: Re: Mind Bender on vero (non madbean content)
Post by: jalmonsalmon on July 14, 2013, 02:27:44 AM
Quote from: jprizz on July 14, 2013, 02:16:51 AM
Looks good! What kind of finish is that? It looks sort of like a wrinkled or textured finish.
Oil

Thanks!
Crushed Velvet Red (Textured) from pedalpartsplus.com
I ordered a blem and they sent that one to me  ;) 
And the blem was on the side of the box near the top. You would never notice it unless you inspect the pedal closely so no biggie  hehee