Print Page - Polarity conversion in a 2-in-1

Title: Polarity conversion in a 2-in-1
Post by: billstein on July 14, 2013, 06:34:38 AM

Hi all,

Put this in another thread that was already started by Eldanko but got no love. So thought I'd start a new one.

I've got a Five O'Clock Fuzz board by 1776 and it has an on-board polarity converter. I want to put this in a box with a Rangemaster. Can I use the polarity conversion off the fuzz for the Rangemaster or do I have to have a separate Road Rage?

Thanks

Title: Re: Polarity conversion in a 2-in-1
Post by: kothoma on July 14, 2013, 08:51:39 AM

I'd say yes. Just run a wire

from the left side of D2 in the lower left corner of the fuzz
to the -9V pad of the Rangemaster.

Title: Re: Polarity conversion in a 2-in-1
Post by: gtr2 on July 14, 2013, 09:30:02 PM

Yeah, you could just leave out D2 and place the wire to your rangemaster in that pad.

The charge pump should be able to provide enough mA for both circuits.

Josh

Title: Re: Polarity conversion in a 2-in-1
Post by: billstein on July 16, 2013, 06:17:51 AM

Thanks guys. A RangeMaster pummeling a Fuzz Face it is then. ;D

madbeanpedals::forum

Projects => General Questions => Topic started by: billstein on July 14, 2013, 06:34:38 AM