Older version Aquaboy finally done. I got a spare "double delay time" add on board from someone on diystompboxes.com, so it has the extra delay chip but not the LFO mod. Love this pedal!!!!
(http://farm8.staticflickr.com/7291/8742797089_942cfdd6f1.jpg)
(http://farm8.staticflickr.com/7284/8742797147_5b0c8b2636.jpg)
Looks great, I like the all white look. You don't see that too often.
Yeah, that all white looks great!
It reminds me of R2D2 :)
Thanks!!!
The LED was from a grab bag and I didn't know the color, I think the blue LED detail "makes" the white enclosure shine!
Since the double delay time boardmakes this slightly "taller" than average in the guts dimensions, I used a deeper/taller type 1590 enclosure - a little blocky but gives it a nice substantial feeling
at the same time I did this non-madbean SSM2166 chip compressor in a similar box/design, but silver/grey
(http://farm8.staticflickr.com/7282/8729611781_d6ae803768.jpg)
Awesome!
I like the all white look, very clean!
hey all quick question that I should ask in another area but...
MN3005 - 2K Fakes from small bear... if I use 2 of those in the Aquaboy DLX
how much delay time will that give me? 600ms?
Worth using? I am not really interested in delay times past 600ms that much...
CHeers!
Not sure about the 3005s. I used 3205's in this and it's the original (early/old - been working on it for a while!) Aquaboy, not the deluxe...
Quote from: jalmonsalmon on July 22, 2013, 11:11:30 PM
Awesome!
I like the all white look, very clean!
hey all quick question that I should ask in another area but...
MN3005 - 2K Fakes from small bear... if I use 2 of those in the Aquaboy DLX
how much delay time will that give me? 600ms?
Worth using? I am not really interested in delay times past 600ms that much...
CHeers!
Quote from: jalmonsalmon on July 22, 2013, 11:11:30 PM
Awesome!
I like the all white look, very clean!
hey all quick question that I should ask in another area but...
MN3005 - 2K Fakes from small bear... if I use 2 of those in the Aquaboy DLX
how much delay time will that give me? 600ms?
Worth using? I am not really interested in delay times past 600ms that much...
CHeers!
1 x MN3005 - 4096 Stages - 300mS MAX (without whine)
1 x MN3008 (or fake 3005) - 2048 Stages - 150mS Max
So 2 fakes you'll get 300mS you'd need 4 chips for 600mS
Worth using though yes.
Ah ok.... hmmm
that would be too much of a bother to rig 4 chips into this pedal without an oscilloscope to get everything right. Bummer... I may as well use a couple of those BL3208B's for a 300ms delay, I am sure they are cheaper than those fakes from sm bear since I see a pair of BL3208B's for about $3
Thanks!