Text only
|
Text with Images
madbeanpedals::forum
Projects => Tech Help - Projects Page => Topic started by: The Rotagilla on August 17, 2013, 03:57:57 PM
Title:
Nautilus R5 resistor...do the pads need to be jumpered if leaving R5 off?
Post by:
The Rotagilla
on
August 17, 2013, 03:57:57 PM
Just wanted to be sure, thanks.
Title:
Re: Nautilus R5 resistor...do the pads need to be jumpered if leaving R5 off?
Post by:
kothoma
on
August 17, 2013, 04:06:45 PM
No, if you jumper the pads of R5 then the PEAK pot no longer works...
Title:
Re: Nautilus R5 resistor...do the pads need to be jumpered if leaving R5 off?
Post by:
The Rotagilla
on
August 17, 2013, 04:18:07 PM
Thanks.
Title:
Re: Nautilus R5 resistor...do the pads need to be jumpered if leaving R5 off?
Post by:
kothoma
on
August 17, 2013, 04:26:52 PM
:)
Text only
|
Text with Images