So, ColesBD was having a clear out and I bought a mixed bag of stuff, a ton of pre drilled enclosures and other stuff, amongst the lot, was a pair of 'half populated Klon bowrds'. When I asked him about them, he said he couldn't remember where they came from, and thought they were sunkings. But now I have them in front of me, they are not. The only writing on the board, in copper looks like the word 'klonk'?
Any help would be appreciated :)
Thanks
George
.
Hmmm, at first I was thinking guitarpcb.com, but when I enlarged it it didn't look to be of the quality of either them or madbean in their etched days (both have since to a large extent switched over to double sided boards). I think it looks like somebody's earlier attempt...the etching isn't that clean.
This one?
http://www.shortscale.org/forum/viewtopic.php?p=467177&sid=5cb64998f9f35d17dd19e370976e4cd4 (http://www.shortscale.org/forum/viewtopic.php?p=467177&sid=5cb64998f9f35d17dd19e370976e4cd4)
Never mind, that one is perf.
Should have looked more closely....
It's the Sunking(madbean) 3rd version !! Without any doubt. I got it in front of me.
That's the one I built, I really like it.....I had also a JHS and put it on sale after comparing.
(http://img.tapatalk.com/d/13/08/26/pune7u8y.jpg)
At first glance it looks like sunking 3, but looks at where the IC's are for a start.
PROBLEM SOLVED! Ignore me. It's the single sided. My sleep deprived brain didn't think it was important to notice I was looking at the double sided layer. I have been having my own boards fabbed for ages, not used an etcher for a while!
Cheers anyway guys,
Sorry for being a tires idiot! Haha
George
No problem !! :)
Hey George, if you ever have an inclination to unload one of those boards, please think of me! ;D
Paul
Yes Paul, the in laws are still over here, so I'll send it back with them to send to you? It's mostly populated, send me an email of you still want it.
George