Print Page - Chunk Chunk

Title: Chunk Chunk
Post by: billstein on September 10, 2013, 05:58:40 AM

My Chunk Chunk. Great pedal especially with a Harmonic Energizer.

This is stock. The faceplate is etched then part of it is tinned and the logo is left copper.

(http://i1276.photobucket.com/albums/y463/BillyBoy837/Chunk%20Chunk/CC1_zpsebc3a972.jpg) (http://s1276.photobucket.com/user/BillyBoy837/media/Chunk%20Chunk/CC1_zpsebc3a972.jpg.html)
(http://i1276.photobucket.com/albums/y463/BillyBoy837/Chunk%20Chunk/CC2_zps2fce83db.jpg) (http://s1276.photobucket.com/user/BillyBoy837/media/Chunk%20Chunk/CC2_zps2fce83db.jpg.html)
(http://i1276.photobucket.com/albums/y463/BillyBoy837/Chunk%20Chunk/CC4_zpsb03b894c.jpg) (http://s1276.photobucket.com/user/BillyBoy837/media/Chunk%20Chunk/CC4_zpsb03b894c.jpg.html)
(http://i1276.photobucket.com/albums/y463/BillyBoy837/Chunk%20Chunk/CClabel_zpse10091d6.jpg) (http://s1276.photobucket.com/user/BillyBoy837/media/Chunk%20Chunk/CClabel_zpse10091d6.jpg.html)
(http://i1276.photobucket.com/albums/y463/BillyBoy837/Chunk%20Chunk/CCInternal_zps0a4baa15.jpg) (http://s1276.photobucket.com/user/BillyBoy837/media/Chunk%20Chunk/CCInternal_zps0a4baa15.jpg.html)

Title: Re: Chunk Chunk
Post by: Guybrush on September 10, 2013, 09:41:10 AM

Oh man, that looks so good.

Really love the look of this. Really need to build a pedal with a faceplate.

Great work.

Title: Re: Chunk Chunk
Post by: wolfingsworth on September 10, 2013, 11:58:31 AM

That is one beautiful faceplate. I don't think I've seen two tone before good idea!

Title: Re: Chunk Chunk
Post by: Vallhagen on September 10, 2013, 06:08:53 PM

Looks great:) Metalizin it is!

Title: Re: Chunk Chunk
Post by: catfud on September 11, 2013, 06:39:52 PM

Wow!

Title: Re: Chunk Chunk
Post by: selfdestroyer on September 11, 2013, 09:39:35 PM

I love what you did with the faceplate and having traces for the LEDs on the back of it. Very ninja like.

Title: Re: Chunk Chunk
Post by: billstein on September 11, 2013, 09:57:39 PM

Thanks for all your kind words. I love this pedal and I'm trying to figure out how to do demo's easily so I can start posting. Hopefully soon.

Edited because my last attempt didn't really sound like English.

Title: Re: Chunk Chunk
Post by: pickdropper on September 11, 2013, 10:18:57 PM

Nice build, Bill. The plate looks great. Nice guts, too.

Title: Re: Chunk Chunk
Post by: angelo on September 29, 2013, 09:10:32 AM

Hi Bill,
May I ask, what voltage biased you made for each drain if you still remember...
Q1=
Q2=
Q3=
Q4=
Does it oscillate at higher volume? Mine is all biased at 4.5v using 8.98v (7809 regulated power transformer). Or did you do further adjust the TRIMMER 1 for more voltage or lesser. Sorry to ask coz mine even adjusting the T1 never seem to stop that squeal. I can only use the volume up to 1 o'clock more than that it whine :'(

Thanks in advance
Angelo

Title: Re: Chunk Chunk
Post by: Thomas_H on September 29, 2013, 01:36:50 PM

This is a great build! Inside and Out.
The Chunk Chunk is one of my favourite pedals.

madbeanpedals::forum

Projects => Build Reports => Topic started by: billstein on September 10, 2013, 05:58:40 AM