Say I was gonna mod the ross phaser clone for bass. Would I just change the input and ouput caps, or would I just change the output and also would I need to change some of the resistor values?
(https://dl.dropboxusercontent.com/u/5560115/ross.png)
Did you read the info on GuitarPCB about the MoRC? I know there was some info an bass modification for the MoRC from Tonmann. I have a board I'm going to turn into a bass comp too so let me know if you discover any secrets along the way.
Quote from: das234 on September 13, 2013, 08:58:50 PM
Did you read the info on GuitarPCB about the MoRC? I know there was some info an bass modification for the MoRC from Tonmann. I have a board I'm going to turn into a bass comp too so let me know if you discover any secrets along the way.
usually it's just the input and or output caps.
(http://upload.wikimedia.org/wikipedia/commons/1/17/Belize_Speed_Bump_Sign.JPG)