madbeanpedals::forum

Projects => General Questions => Errata, Corrections, Revisions => Topic started by: madbean on September 24, 2013, 01:45:26 PM

Title: Kingslayer - Incorrect part link to Mouser
Post by: madbean on September 24, 2013, 01:45:26 PM
Someone pointed out to me that the Kingslayer doc seemed to link to the SMD version of the TLC274 rather than the through hole. On the original link, it pictures an SMD now but the specification lists it as PDIP and through hole.

So, I've updated the link to another variety of the TLC274 on Mouser which should be fine for the build.
http://www.mouser.com/ProductDetail/Texas-Instruments/TLC274BCNE4/?qs=sGAEpiMZZMtCHixnSjNA6Dh9CQmOfcFckc%2foEj30LNU%3d