Assuming that pots and switches aren't board mounted and that there are two pots and one SPST switch, how small does a board need to be to be practical for a 1590A build?
I can easily fit a 60mm long x 33mm wide PCB into a 1590a. The recent Klon layout I did is 65mm long, but I did put a cutout for the posts in the front of the enclosure.
Since I use full size enclosed 1/4" sockets, the depth of the pots and switches don't factor in too much with my builds. I know some folks use open jacks and they may plan things out differently.
That's very helpful. Many thanks for the info.
Quote from: RobA on October 19, 2013, 05:19:14 AM
That's very helpful. Many thanks for the info.
Sure thing. Good luck with the layout.