Print Page - Slippery when wet.

Title: Slippery when wet.
Post by: GrindCustoms on November 20, 2013, 11:57:13 PM

Madbean's Pork Barrel 8)

MN3007 powered, did the Rate/Depth status LED and ON/Bypass status LED in the knobs.

(https://scontent-a-ord.xx.fbcdn.net/hphotos-prn2/1471795_556343654440929_1628006115_n.jpg)

(https://scontent-a-ord.xx.fbcdn.net/hphotos-frc3/1451967_556343674440927_331897410_n.jpg)

Some sort of useless clip :o

https://www.facebook.com/photo.php?v=556345404440754&set=vb.241720062569958&type=2&theater

Title: Re: Slippery when wet.
Post by: diablochris6 on November 21, 2013, 05:25:57 AM

Good build! Nice and tight.

Title: Re: Slippery when wet.
Post by: selfdestroyer on November 21, 2013, 05:58:41 PM

Very cool idea with the knob LEDs.

Title: Re: Slippery when wet.
Post by: pickdropper on November 22, 2013, 01:19:15 AM

Great build, Rej. Nice CE-2 blue on that as well.

Title: Re: Slippery when wet.
Post by: GrindCustoms on November 25, 2013, 02:25:56 AM

Thanks guys :)

I really like chorus for cleans... ...because yeah, i do play clean sometime :)

Anyway, this one is slowly kicking out the Maxon CS550 from the board, sounds great, smaller footprint. Sounds less metallic compared to 550.

Quote from: pickdropper on November 22, 2013, 01:19:15 AM
Great build, Rej. Nice CE-2 blue on that as well.

Since you popped the idea the other day, i went for it.

madbeanpedals::forum

Projects => Build Reports => Topic started by: GrindCustoms on November 20, 2013, 11:57:13 PM