madbeanpedals::forum

This is my Zero Point Micro delay with modulation.

- 1MB pot for variable modulation speed
- I use a 75k on R18.
- Clamp mod.
- Jacks are Neutrik NJ-2-FDV.
- DC jack is Lumberg Lumberg PSU 1614-09.
- 1590A enclosure with my first etching decoration.
- Text are in catalan. Top left the time control. Top right the feedback control. Down left mix control and down right speed mod. control.





(https://lh6.googleusercontent.com/-gLNVgF2wOUQ/UpELe8i2XBI/AAAAAAAAAFg/ixPmvuZy59s/w1242-h928-no/IMG_4648.JPG)

(https://lh3.googleusercontent.com/-D_-0KsMvwk4/UpELxbGajvI/AAAAAAAAAGE/ouxbxeEQm2g/w693-h928-no/IMG_4678.JPG)

(https://lh6.googleusercontent.com/-vwNWvfzNsvk/UpEMk_Uu92I/AAAAAAAAAHI/_4nuKwdOHUE/w1237-h928-no/IMG_5424.JPG)

(https://lh4.googleusercontent.com/-pqnrutJufCs/UpEMJVq253I/AAAAAAAAAGo/954HmRIwAKM/w1237-h928-no/IMG_5389.JPG)

(https://lh6.googleusercontent.com/-RGXpts2nebs/UpEMKIozt0I/AAAAAAAAAGs/nDYgLgrdvkw/w1237-h928-no/IMG_5391.JPG)

(https://lh6.googleusercontent.com/-HNVACEHOk_8/UpEMV9A0fQI/AAAAAAAAAG4/z4-D0YGktFQ/w1237-h928-no/IMG_5395.JPG)

(https://lh4.googleusercontent.com/-w994D16Qwfk/UpEMcwr0jXI/AAAAAAAAAHA/M9kcWIyjnz8/w1237-h928-no/IMG_5398.JPG)

That's fantastic looking, very industrial. Nicely done.

I like the way you do build reports. I like seeing some of the process you go through in your builds. Thanks for sharing!

Jacob

Thanks!

I learned to observe other builds!

Sharing = win-win

Hard to believe that's your first etch, it looks great.

Looks great, nice work!

Yes, is my first etching. I think there is much to improve. However I'm happy with the result!