Hi guys, i'm boxing up 3 modulation circuits in one box and the only one that don't have the Rate LED is the EM.
Anyone have done that before or is it simply possible?
Thanks
Rej
Should be pretty straight forward.
LED+ to the LFO output pin. LED - to GND. ;)
With current limiting resistor of course!
Quote from: Govmnt_Lacky on November 26, 2013, 12:09:20 AM
Should be pretty straight forward.
LED+ to the LFO output pin. LED - to GND. ;)
With current limiting resistor of course!
Indeed, but i'd like to have feedback, just want to be sure it won't change the behavior of the circuit.
Pin14 of LM324N IC, 10K CLR on 3mm superbright green LED, worked flawlessly! :)