Print Page - Rangemaster Input Caps

Title: Rangemaster Input Caps
Post by: StompIt on February 28, 2011, 03:18:25 PM

Hi Guys,
This is my first MadBean build and I have an easy question for you.

For input Caps, I have just soldered in a 4700pf xicon ceramic cap in C1 and a 10n poly film in C2. Are these choices going to give me the desired Rangemaster tone? (I know there is alot of discussion on this topic). I have seen gut shots on this forum with Sprague Atoms and some other large orange caps. I do have radial electrolytics in C3 and C5.

FYI: I do have the OC44 coming from Small Bear (hopefully with resistor recommendations).

How am I doing?
thanks

Title: Re: Rangemaster Input Caps
Post by: stecykmi on February 28, 2011, 07:18:02 PM

no reason that shouldn't work!

Title: Re: Rangemaster Input Caps
Post by: bigmufffuzzwizz on February 28, 2011, 07:26:33 PM

sounds good. i would recommend focusing on trying different values first before you worry about "mojo" parts but your definitely on the right track.

Title: Re: Rangemaster Input Caps
Post by: StompIt on February 28, 2011, 08:50:21 PM

Excellent! Thanks guys

madbeanpedals::forum

Projects => Tech Help - Projects Page => Topic started by: StompIt on February 28, 2011, 03:18:25 PM