Text only | Text with Images

madbeanpedals::forum

General => Open Discussion => Topic started by: Jmilla on January 12, 2014, 05:23:19 PM

Title: Osh park Smd to through hole?
Post by: Jmilla on January 12, 2014, 05:23:19 PM
Anyone know of any shared projects like this on oshpark? I have no way of etching adapters where I live and am wanting to build a few jfet projects.
Title: Re: Osh park Smd to through hole?
Post by: jubal81 on January 12, 2014, 05:27:16 PM
I did one panelized a while back. Just shared it for ya.

http://www.oshpark.com/shared_projects/zQlKLvxw
Title: Re: Osh park Smd to through hole?
Post by: Jmilla on January 12, 2014, 05:30:35 PM
Thanks a bunch!
Title: Re: Osh park Smd to through hole?
Post by: catfud on January 12, 2014, 09:37:56 PM
Quote from: jubal81 on January 12, 2014, 05:27:16 PM
I did one panelized a while back.

Hi jubal81, when you ordered these did they come back from osh park with partial cuts between the sub-boards, or did you cut and separate them? And hey, thanks for sharing!
Title: Re: Osh park Smd to through hole?
Post by: jubal81 on January 12, 2014, 09:48:59 PM
I never ordered from OSH. I used Seeed. As is, they have to be cut and separated - no V-cuts or anything.
Text only | Text with Images