I mentioned this earlier today and posted it in the 1776 section but thought I would get more of a response here. I thought I had fixed it but was wrong.
Anyway, the effect sounds great but I keep feeling that I am missing some volume. It is loud and sounds great on a tube amp but Compared to the MudBunny this volume is lower. There might not be anything wrong with it so I am still looking for a Demo. If you have a Demo please let me know where to find it.
I checked all resistors and they are the correct value from the Build materials. I did notice that the pinout on the Volume pot is only mesuring 50K when it is on the board. I took it off and it was 100k. I replaced it anyway, but it happend again.
Here are the Tansistor volts
Q1 C 0.02
B 0.64
E 4.10
Q2 C 0.04
B 0.65
E 4.32
Q3 C 0.02
B 0.65
E 4.09
(http://i.imgur.com/kX8kDTNl.jpg)
Sorry for all the posts, a quick reflow and it is working like a charm.