Print Page - First pedal post

Title: First pedal post
Post by: flanagan0718 on January 22, 2014, 04:58:02 PM

Hey Guys,
This is the first build I have posted on this forum. I've built a bunch of pedals but for some reason decided to post this one. This is a vero/strip board layout of the AMZ boost. Hope you like it!!!

Title: Re: First pedal post
Post by: rullywowr on January 22, 2014, 05:03:31 PM

Looks great! Welcome to the forum. It's no easy feat putting anything in a 1590a! Congratulations.

Title: Re: First pedal post
Post by: flanagan0718 on January 22, 2014, 05:40:57 PM

It certainly was a feat! For such a small board it was a pain in the ass. This is a Tayda enclosure and I read that they are 2 mm smaller than the Hammond. That 2 mm makes a difference.

Title: Re: First pedal post
Post by: aballen on January 27, 2014, 01:48:08 AM

Looks good man. Be careful, the 1590a can get a bit addicting.

Title: Re: First pedal post
Post by: jimilee on January 27, 2014, 02:15:37 AM

Nicely executed, and welcome!!!

madbeanpedals::forum

General => Open Discussion => Topic started by: flanagan0718 on January 22, 2014, 04:58:02 PM