I'm trying to deliver 18v to a Timmy Pedal using the schematic from the road rage, with a few components left out. I'm installing it inside the enclosure I housed the Timmy in. Problem is, i'm not getting 18v from the 18v output, i'm only getting 9 volts. I've included the schematic and layout i'm using for my board, I made my own layout without the -9v output and the regulated output. Any help would be greatly appreciated.
[attachment deleted by admin]
Take out C2.
Would that be C2 on my schematic or C2 in the schematic from your project files? :)
In yours. It is not needed for what you are doing. I'm not sure if that is causing the problem, but it will at least eliminate one possibility.