I have a Ross Distortion that I am modding. It was a gift to me and came without knobs. Would these be D-Type shafts on the pots? If so, who carries them? Couldn't find them on Tayda, Mammoth, SmallBear or Pedalpartsplus. Doesn't mean they aren't there though.(http://img.tapatalk.com/d/14/02/06/pyvu3yma.jpg)
breakout your calipers.
http://www.mouser.com/Electromechanical/Knobs-Dials/_/N-5g22?P=1z0z2f1Z1z0jm4cZ1yxc8gf
Thanks Clayford! Hopefully I'll have a friend who has calipers.
Does the Ross use the large boss style but just D shaft?
It appears so
the original knobs look similar to Davies 1500:
the Boss style knobs were used on versions in MXR type enclosures
since I didn't see any Davies with a D-shaft, you might take a look at an Eagle Plastics 450-5320C:
http://www.mouser.com/catalogviewer/default.aspx?page=2040&highlight=450-4760&catalogculture=en-US&catalog=646
(sixth one down on the upper left)
although the Ross knob looks taller, with a sloped side
?1590bg?
(http://ca.mouser.com/images/daviesmolding/images/1510AH_1510AM_1510AZ_1510BG.jpg?wax-srv=wBWV07jMQmk2P5im9uLA3g05)
http://ca.mouser.com/ProductDetail/Davies-Molding/1510BG/?qs=sGAEpiMZZMs8jstQXqv0yeS%2fL2lkOUvX
those look right ... but DAMN ... $5 a piece!
Dang! I might just try to adjust a set screw just right and push it down on the shaft. Don't want to drop $10 plus shipping on some knobs.
Check in Conrad.de
If you find i could pick it up and send to you! Than no expensive delivery costs! Let me lnow!
Cheers