Hi guys....so I got a loophole PCB from haberdasher and I'm just a bit confused on populating it....do I look at the original build doc and just place components as they are on that with the trace on the bottom to solder them?
Yes.
okay thanks Josh. guess I wasn't too confused then huh :)
On my black '65, I took a fine tip sharpie and drew on the bare side, marking each value, R1,R2, etc... so that i didnt have to keep looking back between the BOM and the layout.
Quote from: mandrewbot3k on February 10, 2014, 11:52:32 PM
On my black '65, I took a fine tip sharpie and drew on the bare side, marking each value, R1,R2, etc... so that i didnt have to keep looking back between the BOM and the layout.
thats a very good idea, thanks