Hey guys, I am modding an MXR Dist+ and I can't seem to get the tone stack mod working properly. It is one of the newer models and every schematic I look up has different values for the capacitors. Any other cool mods would be welcomed as well. Thanks a million!
Do you have a link to the schematic for the mod you want to use?
I was using these instructions but nothing was lining up. The values for the Cap and resistor labels were off.
http://www.dinosaurrockguitar.com/new/node/675
It does line up with schematics I've got for the distortion+. But, h hasn't included the power supply section in his schematic, so the labels are going to be different.
If you are just looking to do the tone control mod itself, that would just be on the 1nF cap after the clipping section and should be reasonably easy to find. To do the other tone related mods though, he's pretty much inverted the control on the gain structure to do it. It's basically a new pedal.
Nice thanks for the help.
Sent from my iPhone using Tapatalk