Anyone know how I could go about wiring an eldred cocked wah onto a push pull pot on my tele for the bridge pickup? After looking for an hour or so I finally understand the 3 way blade switch and the push pull pot, and that it basically throws the treble frequencies to ground with a 4700pf cap (I think). Just now having a hard time imagining how the switching would work (P.S. you wouldn't want to see my hours of attempts at an effect order switcher until I finally just googled it).
Bump it up
(http://www.tdpri.com/forum/attachments/just-pickups/147736d1350059515-push-pull-eldred-mod-stock-tone-esquire-eldred_push_pull-jpg)
http://www.tdpri.com/forum/just-pickups/356000-push-pull-eldred-mod-stock-tone-esquire.html (http://www.tdpri.com/forum/just-pickups/356000-push-pull-eldred-mod-stock-tone-esquire.html)
Thanks! Need to try this out soon.