Print Page - Green Bean 2014 Fat Mod and R21

Title: Green Bean 2014 Fat Mod and R21
Post by: qnarak on March 21, 2014, 07:00:31 PM

Hi all!

anybody knows what is the purpose of R21 (1M) in the new version of Green Bean fat mod?

thanks in advance,
Emilio.

Title: Re: Green Bean 2014 Fat Mod and R21
Post by: blearyeyes on March 21, 2014, 07:21:04 PM

having yet to be able to see most of a schematics functions, perhaps it is to stop "pops" when switching or added to the different caps for filtering just a guess.

Title: Re: Green Bean 2014 Fat Mod and R21
Post by: madbean on March 21, 2014, 08:18:31 PM

That is exactly correct. It will minimize popping on the switch.

Title: Re: Green Bean 2014 Fat Mod and R21
Post by: blearyeyes on March 21, 2014, 10:55:10 PM

Quote from: madbean on March 21, 2014, 08:18:31 PM
That is exactly correct. It will minimize popping on the switch.

Wow! I feel like I am getting this stuff........ slowly.

Title: Re: Green Bean 2014 Fat Mod and R21
Post by: qnarak on March 22, 2014, 01:29:37 AM

Thanks for the fast response Brian & Blearyeyes.

Title: Re: Green Bean 2014 Fat Mod and R21
Post by: madbean on March 22, 2014, 01:35:35 AM

This trick works in general. If you ever have an SPDT that pops use a 1 - 10M resistor between the two outer lugs. The resistor lets a little bit of current through- not enough to effect tone usually, but enough so that the jump between states is softer.

madbeanpedals::forum

Projects => General Questions => Topic started by: qnarak on March 21, 2014, 07:00:31 PM