Print Page - Green bean and 3 pdt switch

Title: Green bean and 3 pdt switch
Post by: scotheath on April 27, 2014, 02:04:00 AM

I'm having trouble figuring out how/where to wire the top left lug of switch to board. Diagram says to wire to SW pad of board , can some one help me out with this, I'm completely lost

Title: Re: Green bean and 3 pdt switch
Post by: jimilee on April 27, 2014, 02:57:30 AM

Which version do you have? The newer version has the LED pad, wire it to the round side of the LED, and the flat side to LUG 1 of the stomp., the older version, just use the standard madbean wiring diagram.

Title: Re: Green bean and 3 pdt switch
Post by: scotheath on April 27, 2014, 03:27:48 AM

I'm guessing I have the newer version. Led on board. Not sure what you mean by round side ? Positive leg of led to board and negative to lug 1 ? Sorry new to this kinda thing

Title: Re: Green bean and 3 pdt switch
Post by: scotheath on April 27, 2014, 04:19:00 PM

Figured it out, thanks :)

madbeanpedals::forum

Projects => General Questions => Topic started by: scotheath on April 27, 2014, 02:04:00 AM