hi all, i have seen the plexitone, its a very simple schematic, but i has a transformer on it, so i was wondering if its better so supply with the transformer or just use a charge pump, does anybody have build this pedal before??
Check out madbeans boneyard...
its that the same???, but for the tone, do you think that using a charge pump its easy or its sound good because of the transformer??
i have seen the boneyard, but its almost the same, but the booster sections has not split??, its there a way to separete the boost from the main distortion?? like the plexi tone?
I built both, and the original plexitone sounds 100 times better
12 volts are felt
I posted the project on 1:1 plexitone freestompboxes
Quote from: richiekotzen on May 19, 2014, 02:22:18 PM
I built both, and the original plexitone sounds 100 times better
12 volts are felt
I posted the project on 1:1 plexitone freestompboxes
do you have the link to the post, and also where you get the transofrmers??
http://www.freestompboxes.org/viewtopic.php?f=7&t=23938&hilit=plexitone
15v 70ma
Quote from: richiekotzen on May 19, 2014, 02:22:18 PM
I built both, and the original plexitone sounds 100 times better
12 volts are felt
I posted the project on 1:1 plexitone freestompboxes
If you could post comparation video, it would be awesome..
Brane
Quote from: brejna on May 20, 2014, 06:22:02 PM
Quote from: richiekotzen on May 19, 2014, 02:22:18 PM
I built both, and the original plexitone sounds 100 times better
12 volts are felt
I posted the project on 1:1 plexitone freestompboxes
If you could post comparation video, it would be awesome..
Brane
just you listen to the original plexitone.
given is that it is an exact copy
I sold them both
Quote from: richiekotzen on May 20, 2014, 01:33:15 PM
http://www.freestompboxes.org/viewtopic.php?f=7&t=23938&hilit=plexitone
15v 70ma
the problem its that the layout, its really hard to read, do you have the schematic??
finished my plexitone, with big Louis Layout,
this really sounds nice!
(http://i.imgur.com/KppqMfOl.jpg)
(http://i.imgur.com/8N5CbYQl.jpg)
Cheers,
Thomas
Quote from: thomasha on November 26, 2014, 01:32:33 AM
finished my plexitone, with big Louis Layout,
this really sounds nice!
(http://i1303.photobucket.com/albums/ag159/Thomas_Eduardt_Hafemann/DSC_0572_zps253fe8c7.jpg)
(http://i1303.photobucket.com/albums/ag159/Thomas_Eduardt_Hafemann/DSC_0545_zps25a882f8.jpg)
Cheers,
Thomas
Did ypu make the layout???
No,
I used the layout from a brazilian forum,
this one: https://www.dropbox.com/s/sh5w1pyd5ia6ujx/PlexiDrive%20-%20Big%20Louis.pdf?dl=0 (https://www.dropbox.com/s/sh5w1pyd5ia6ujx/PlexiDrive%20-%20Big%20Louis.pdf?dl=0)
the name is plexidrive, but the schematic is the same as the Plexituna, with only one gain Pot.
I'm thinking of using a switch to add a 110k resistor in paralel with the 1M pot to have crunch and hi gain with the same pot.
but at lower gain settings it becomes as crunchy as with the 100k pot.