madbeanpedals::forum

Projects => General Questions => Topic started by: copachino on May 21, 2014, 01:57:18 PM

Title: kingslayer II capacitors
Post by: copachino on May 21, 2014, 01:57:18 PM
hi, as i already been able to pay my Board, im making a small bears shopping for the board, but, i have seen rare capacitor that are not in stock on small bear, this are 5n6, 68n, 390n, and also 422k resistor, also its not listed the 1N5817 diode(i think maybe a 1N400x can work here), can i change this values for the close next??
Title: Re: kingslayer II capacitors
Post by: midwayfair on May 21, 2014, 02:13:39 PM
Some of those capacitors are in stock at smallbear:
http://www.smallbearelec.com/servlet/Detail?no=892

.0056 mf 3932  in stock
.068 mf 4412  in stock

5817 is the same as:
http://www.smallbearelec.com/servlet/Detail?no=509

Don't use a 4001, it will drop the voltage much more.

You can add a 33K in series with a 390K to get the 422K.

The 390nF is a pain in the butt to source. I got some at Mouser. Tayda also has them.

You can definitely get all of these at Mouser, as well.