Print Page - Two Sunking IIs, one in a 125B

Title: Two Sunking IIs, one in a 125B
Post by: jamesmafyew on May 23, 2014, 05:41:50 AM

I had asked about fitting a SKII in a 125B in the questions forum but it didn't appear that anyone had done it yet. The SunKing II PCB is luxuriantly large and wouldn't fit in a 1590B, but I was able to easily fit it in the taller 125B where the PCB just sits under everything else. Only one switch on this -- clipping. 3-way selects between 1N270, BAT41, or asymmetric LED+1N914.

(http://gs1.wac.edgecastcdn.net/8019B6/data.tumblr.com/c7a447d6316bfa6d5aafd92f98d89d17/tumblr_n60hug6bSD1qbg257o1_1280.jpg) (http://gs1.wac.edgecastcdn.net/8019B6/data.tumblr.com/c7a447d6316bfa6d5aafd92f98d89d17/tumblr_n60hug6bSD1qbg257o1_1280.jpg)

I did build one in a 125BB first, using the Madbean drilling template, which also turned out really nicely. That has the fat and thick switches too, although with the values altered, and 1N277 or BAT41 clipping options. In the picture it's next to a previous Klone (left) I built on vero in a 1590DD. I like the smaller size a lot.

(http://gs1.wac.edgecastcdn.net/8019B6/data.tumblr.com/86cc6447ded1c1f4a1e25cb7a1462930/tumblr_n5y1k4lun51qbg257o1_1280.jpg) (http://gs1.wac.edgecastcdn.net/8019B6/data.tumblr.com/86cc6447ded1c1f4a1e25cb7a1462930/tumblr_n5y1k4lun51qbg257o1_1280.jpg)

Title: Re: Two Sunking IIs, one in a 125B
Post by: muddyfox on May 23, 2014, 05:48:27 AM

Guts! Guts! Guts!
Sheesh... Have you lurkers learnt nothing by now? ;D ;D ;D

Title: Re: Two Sunking IIs, one in a 125B
Post by: jamesmafyew on May 23, 2014, 06:01:27 AM

Sure, here's the 125B one. Hard to see much under there, the way it's wired up. I don't have the BB-size one handy to take a picture of.

(http://gs1.wac.edgecastcdn.net/8019B6/data.tumblr.com/e489fcd2d457df16439062e2887d16c6/tumblr_n60j6nCJ731qbg257o1_1280.jpg) (http://gs1.wac.edgecastcdn.net/8019B6/data.tumblr.com/e489fcd2d457df16439062e2887d16c6/tumblr_n60j6nCJ731qbg257o1_1280.jpg)

Title: Re: Two Sunking IIs, one in a 125B
Post by: m-Kresol on May 23, 2014, 07:14:54 AM

Very good looking builds alltogether. Dig the knobs!

Title: Re: Two Sunking IIs, one in a 125B
Post by: Tremster on May 23, 2014, 07:16:06 AM

Man.

Title: Re: Two Sunking IIs, one in a 125B
Post by: sturgeo on May 23, 2014, 08:54:42 AM

Wow, all look brilliant.

What paint/powder coat are you using? lovely finish on all three boxes!

Title: Re: Two Sunking IIs, one in a 125B
Post by: midwayfair on May 23, 2014, 11:45:20 AM

Great job on the squeeze! Tidy looking under there, too. :)

Title: Re: Two Sunking IIs, one in a 125B
Post by: jamesmafyew on May 23, 2014, 12:20:01 PM

Quote from: sturgeo on May 23, 2014, 08:54:42 AMWhat paint/powder coat are you using? lovely finish on all three boxes!

All three enclosures are from Pedal Parts Plus. Their "vein" colors are my favorite.

Title: Re: Two Sunking IIs, one in a 125B
Post by: pryde on May 23, 2014, 12:50:49 PM

Really dig the overall look of these pedals. Great job mang!

Title: Re: Two Sunking IIs, one in a 125B
Post by: Leevibe on May 23, 2014, 01:00:12 PM

I love the knobs too. And great looking name plate! Good job on getting it to fit.

Title: Re: Two Sunking IIs, one in a 125B
Post by: lincolnic on May 24, 2014, 03:36:22 AM

These look fantastic. Looking forward to seeing more of your builds!

madbeanpedals::forum

Projects => Build Reports => Topic started by: jamesmafyew on May 23, 2014, 05:41:50 AM