Print Page - Help with PCB Design

Title: Help with PCB Design
Post by: J. Ignacio on May 28, 2014, 03:02:29 AM

Hi guys! Trying to build me own pcb I started with Lovepedal Silicon Fuzzmaster. I used EAGLE program. I transfered the schematic and then made lots of tries to build pcb but I coundn't design a right pcb.
I have all archives in EAGLE. I think my problem is related to the joints between conductive tracks and components. I make lots of joints and it is a spider net.

Can you help me???

Thanks.

Here is the schematic picture

(http://i1281.photobucket.com/albums/a512/JIgnacio_90/LovepedalSiliconFuzzmasterRev3_zps0390c475.gif)

Title: Re: Help with PCB Design
Post by: murdog47 on May 28, 2014, 03:13:18 AM

http://www.madbeanpedals.com/forum/index.php?topic=9661.msg84859#msg84859

Title: Re: Help with PCB Design
Post by: Stomptown on May 28, 2014, 03:15:41 AM

Have you watched these tutorials yet? These should get you going with eagle:

http://www.madbeanpedals.com/forum/index.php?topic=9661.0

I would also download this parts library and use these parts to design your schematic/pcb (if you don't have it already). The tutorials will teach you how to load it into eagle.

http://www.madbeanpedals.com/forum/index.php?topic=8293.msg71812#msg71812

madbeanpedals::forum

Projects => General Questions => Topic started by: J. Ignacio on May 28, 2014, 03:02:29 AM