Text only | Text with Images

madbeanpedals::forum

Projects => General Questions => Topic started by: Stig on May 30, 2014, 08:51:13 PM

Title: 2pdt switch in fatpants 2013.
Post by: Stig on May 30, 2014, 08:51:13 PM
Hi all.

I just bought some new boards including the fatpants 2013.

Since Im only using 6 of the 9 pinouts on the 3pdt switch, would It be ok to use a 2pdt istead?

Thanks in advance.
(http://img.tapatalk.com/d/14/05/31/mu8e8u3a.jpg)
Title: Re: 2pdt switch in fatpants 2013.
Post by: muddyfox on May 30, 2014, 08:54:23 PM

Sure.
Title: Re: 2pdt switch in fatpants 2013.
Post by: alanp on May 30, 2014, 08:54:40 PM
Should be, most people use a 3PDT because we tend to keep stocks of those, and not DPDT stomps :)
Title: Re: 2pdt switch in fatpants 2013.
Post by: madbean on May 30, 2014, 09:19:40 PM
If you are building the buffered bypass version, yes. If you want to build it true bypass, then you should use a 3pdt.
Title: Re: 2pdt switch in fatpants 2013.
Post by: Stig on May 31, 2014, 06:46:30 AM
I have been building the buffered one. And have just track and traced my tayda order to be ready for Pick up. The dpdt I have are soft. I like soft. Sooooft:-)
Thanks guys.


Sent from my iPhone using Tapatalk
Title: Re: 2pdt switch in fatpants 2013.
Post by: muddyfox on May 31, 2014, 07:01:59 AM

Just make sure your soft dpdts aren't momentary...  ;)
Title: Re: 2pdt switch in fatpants 2013.
Post by: Stig on May 31, 2014, 08:07:44 AM
Yes. I know. But thanks for the heads up.


Sent from my iPhone using Tapatalk
Text only | Text with Images