Just a simple sunking for my gig board. Nothing fancy because I had to get it up and running fast for tomorrow!
Josh
(http://farm6.static.flickr.com/5143/5625449757_61be9519d9_b.jpg) (http://www.flickr.com/photos/31503679@N02/5625449757/)
(http://farm6.static.flickr.com/5267/5626039832_d91fc9bc37_z.jpg) (http://www.flickr.com/photos/31503679@N02/5626039832/)
(http://farm6.static.flickr.com/5304/5626040506_b8d3d7c66b_b.jpg) (http://www.flickr.com/photos/31503679@N02/5626040506/)
I like the simple ones the best. Looks nice and clean. Where on earth did you get that white DC jack? Must have :o
I'm building one of these now...
Where did you get your IC3 ( ICL7660SCP)?
What diodes are ya using/what do you think of em?
This looks awesome man! Congrats!
Paul, the white DC jacks are available at guitarpcb.com
http://www.guitarpcb.com/apps/webstore/products/show/2147602
Apparently sold out at the moment...:(
-Kaleb
Thanks. I got the 7600SCPA at futurlec. The white power jack from guitar pcb like Kaleb said. ;) I've been using them very sparingly.
I used what futurlec gave me as a work alike for 1n34's. They sounded good to me :) I tried a few other types but these ended up going in the build. I just picked and stuck with it. I've got a few other pedals with diode selector switches and they end up never getting flipped anyways... :D
Josh
I dig the sparkle enclosure and purple/pink led
my bad, I meant the 7660SCPA, which I can't even find on Futurlec ???
You say its simple so nonchalantly!! ;) I still have to get my first one together.
Quote from: gtr2 on April 17, 2011, 02:54:47 AM
I used what futurlec gave me as a work alike for 1n34's. They sounded good to me :) I tried a few other types but these ended up going in the build. I just picked and stuck with it. I've got a few other pedals with diode selector switches and they end up never getting flipped anyways... :D
There was a discussion over at BYOC about these and I believe they are 1n60P. They match the 1n60P's I bought from futurlec so I'm guessing those must be it. Plus it was mentioned that their datasheets are ALMOST identical. I think they sound good!
+1 for the pink LED(at least it looks pink). With a finish/great sound pedal like that you don't need anything else.
Quote from: k.rock! on April 17, 2011, 02:39:19 AM
This looks awesome man! Congrats!
Paul, the white DC jacks are available at guitarpcb.com
http://www.guitarpcb.com/apps/webstore/products/show/2147602
Apparently sold out at the moment...:(
-Kaleb
Thanks, definitely bookmarking that page and getting an order in on the next batch, those look too cool.
Quote from: bigmufffuzzwizz on April 17, 2011, 03:55:51 AM
You say its simple so nonchalantly!! ;) I still have to get my first one together.
Quote from: gtr2 on April 17, 2011, 02:54:47 AM
I used what futurlec gave me as a work alike for 1n34's. They sounded good to me :) I tried a few other types but these ended up going in the build. I just picked and stuck with it. I've got a few other pedals with diode selector switches and they end up never getting flipped anyways... :D
There was a discussion over at BYOC about these and I believe they are 1n60P. They match the 1n60P's I bought from futurlec so I'm guessing those must be it. Plus it was mentioned that their datasheets are ALMOST identical. I think they sound good!
+1 for the pink LED(at least it looks pink). With a finish/great sound pedal like that you don't need anything else.
I bought a batch of supposed germanium 1n34a's and 1n60's from ebay and they all came as DO35 Schottky Barrier diodes labelled as 1n60p and 1n60 with Vf 0.21V and 0.18V respectively. I'm pissed and let the store owner know, he is sending me "real" germanium point contact diodes now, we'll see about that. Definitely buy from a reputable source.
yea the ones I recieve read about .32 voltage drop which is pretty close to the .4 that germaniums should read. I think they send different items depending on how many you order. For the .1 uf box film caps I order about 50 and they sent me the blue one(epcos I believe). For the .01 uf box film caps they sent wima's but half were the right value and the other half were .1 wimas. I'm thinking they might give work-alikes if you order bulk...idk
I wish I worked in their factory.