I was wondering if it is possible to lower the dry signal of the Zero Point Mini, so I can get more delay signal.
I think it would fun to try.
This one is for Brian, if he has time. I'd like to get a little more depth out of the mix pot.
I messed with this a little bit and but had no luck. I tried lifting r4, r5 and r15, not all at once though. It would be sweet if I could adjust the the delay depth to go a little more wet.
thanks in advance for any help
Jeremy
Simply make R4 bigger, to reduce the dry signal,
or make R19 smaller, to increase the wet signal,
as the resp. gains are calculated -R5/R4 and -R5/R19.
thanks :) That just what I needed to know.
Dual gang pot, one wired in reverse, might be cool here?
What kothoma said. Make R19 smaller. Try 8k2 or 10k.