I just finished up my Darkside build and have no power to the LED. I am wondering if I miss wired the 9v power jack? I did try flip flopping the two hot " red " wires on the 9v Jack but that did not help anything :o This is a little different wiring than I am use to. I think I followed the instructions properly ;D ;)
-Shane
(http://i10.photobucket.com/albums/a103/sdlogan9/G%20-%202/photo1_zps4265b0b3.jpg) (http://s10.photobucket.com/user/sdlogan9/media/G%20-%202/photo1_zps4265b0b3.jpg.html)(http://i10.photobucket.com/albums/a103/sdlogan9/G%20-%202/photo4_zps83df89ed.jpg) (http://s10.photobucket.com/user/sdlogan9/media/G%20-%202/photo4_zps83df89ed.jpg.html)(http://i10.photobucket.com/albums/a103/sdlogan9/G%20-%202/photo3_zps0b29221e.jpg) (http://s10.photobucket.com/user/sdlogan9/media/G%20-%202/photo3_zps0b29221e.jpg.html)(http://i10.photobucket.com/albums/a103/sdlogan9/G%20-%202/photo1_zps3cd74663.jpg) (http://s10.photobucket.com/user/sdlogan9/media/G%20-%202/photo1_zps3cd74663.jpg.html)
Any Idea's... anyone familiar with this build?
I do get sound at the Output jack with an audio probe in bypass and with the effect engaged. I will prob around some more in the circuit and see what I can find. I suspect I have somthing miss wired
Ok - so this morning I took a audio probe and checked all over the circuit. I seem to be getting sound everywhere in the circuit except the part labeled " Power section " in the schematic included in the build instructions. I took a magnify glass and closely inspected the traces.. they are all very clean with no bridges across to another trace. I also double checked the placement of the electrolytic caps and the BC549's .
-Shane