I guys,
I was thinking of trying to etch a few 3pdt boards, so i was wondering if anyone had a layout for etching 3pdt boards?
Best regards
check out this thread.http://www.madbeanpedals.com/forum/index.php?topic=15361.msg144752#msg144752 (http://www.madbeanpedals.com/forum/index.php?topic=15361.msg144752#msg144752) These are the ones I use.
Thanks for the reply! Can Cody boards be used with a normal 3pdt, instead of a 3pdt with pcb leads? are the holes for the 3pdt too small for that?
They are meant for the regular solder lug. I use them with the solder lug and they work fine.
Sent from my iPhone using Tapatalk
Not an etching option but definitely a shameless self promotion. My 3pdt pcb's (http://www.diyguitarpedals.com.au/shop/index.php?main_page=product_info&cPath=1&products_id=70) will work with both solder lug and pcb pin
Quote from: chromesphere on July 16, 2014, 12:19:58 AM
Not an etching option but definitely a shameless self promotion. My 3pdt pcb's (http://www.diyguitarpedals.com.au/shop/index.php?main_page=product_info&cPath=1&products_id=70) will work with both solder lug and pcb pin
His boards are awesome! I've used them a few times and wouldn't hesitate ordering them again!
Sent from my iPhone using Tapatalk
Quote from: HailToTheBlues on July 15, 2014, 10:06:35 PM
Thanks for the reply! Can Cody boards be used with a normal 3pdt, instead of a 3pdt with pcb leads? are the holes for the 3pdt too small for that?
I made that design so it will accept both PCB mount (What I use) or soldier lug 3PDT switches. Just drill the hole accordingly. Hope they work out for you.
Cody
okay then, thanks cody, and everyone. When i finish ecthing the boards, i'll update this post, just because :D